Marca | Modelo (Chassis) | Sintoma | Causa | Solução | Por: |
---|---|---|---|---|---|
Sony | SL2710 | WILL STOP WHEN IN RW | When unit went into rewind, it would shut down. | ||
Sony | SL2710 | DRUM MOTOR NOT RUNNING | Conductive glue on hall device. As it got older and harder,it was not allowing the hall device to conduct. | ||
Sony | SL2710 | INTERMITTENT Y SIGNAL IN PAUSE AND BETASCAN | Intermittently the luminance signal would disappear. The10.7Mhz at pin 3 of IC-14 would come and go intermittently. | ||
Sony | SL2710 | INTERMITTENT CRACKING NOISE IN AUDIO | Unit would produce a cracking noise in the linear audio, thishappened on RECORD only. Looking at RF envelope you could see a gap be-tween (A) and (B) head. First thought it was tape path but this did notmake sense since playback was ok. Traced problem | ||
Sony | SL2710 | SERVICE BULLETIN NO. 277 NEEDS REVISION | Ordered part as per S/B No. 277. Part had boss whichinterfered with mechanical chassis. | ||
Sony | SL2710 | SLIGHT HORIZONTAL JITTER IN TOP OF PICTURE | Unit displayed slight jitter in top of picture when playingpre-recorded tapes. Self record OK. Slowing down head drum with fingerimproved picture. Drum free run adj. had no effect on jitter. Replacingupper drum had no effect. | ||
Sony | SL2710 | NO TUNER MODE | Unit would not operate in tuner mode. Channel indicator LEDwould not light up and no picture on monitor. | ||
Sony | SL2710 | LOADING & THREADING ARE VERY SLOW | Unit would load and thread very slowly. Found loading motorgetting hot. Also voltage on motor only 7.6VDC. | ||
Sony | SL2710 | BETA HIFI MUTE IN X2 MODE | Unit worked in all functions except that the Beta HiFi wouldmute in X2 mode. We found that Q14 was turning on in X2 mode despite thefact that AF mute line/CN403 was low. There was sufficient forward biasthrough D015 to turn it on. This was remedied by | ||
Sony | SL2710 | W&F AND POOR CAPSTAN LOCKUP | Capstan wow and flutter, with transition from CUE and PAUSE toplay not smooth. Capstan would speed up and slow down several timesbefore locking. On SL-2710 #11456 it was noticed that C29 and R110 wereremoved from the SS-19 bd. sometime after production | ||
Sony | SL2710 | NO STOP IN PAUSE | No stop in pause. The capstan would contain to pull tape try-ing to get a clear picture in pause. The tape pulled would still on exitside because the reels do not take up tape in pause. These units hadmany hours on them and there were wear marks on up | ||
Sony | SL2710 | WRONG REPLACEMENT PART (PINCH SOLENOID) | The replacement part 1-454-365-51 has the wrong plug assemblyon the end of the wiring harness. This replacement part has the largestyle plug and the unit uses the small style. | ||
Sony | SL2710 | PART NO. OF CHASSIS | We need a part number of chassis. -HQ COMMENTS: Please refer to S/B No. 195 (July 31, 1985). Part numberis X-3681-108-7. | ||
Sony | SL2710 | EJECT | Pressed EJECT, unit unload half way, stop and reload. | ||
Sony | SL2710 | CLOGGED HEAD | Repetitive clogging, then one head dead. |