Marca | Modelo (Chassis) | Sintoma | Causa | Solução | Por: |
---|---|---|---|---|---|
Sony | SL2410 | CAPSTAN SPEED AND PHASE DO NOT LOCK | In BII the picture has noise bars and the audio is unstable.TP11 on the (SS-13) board should have a 50% duty cycle. The waveform isdistorted with a series of negative pulses. The waveform at TP9 is ok. | ||
Sony | SL2410 | NO CAPSTAN SERVO | The capstan servo on these units would not lock up. Thecustomer tracking control POT was found to be open. The servo freq. wasclose but not locked. | ||
Sony | SL2410 | INTERMITTENT AUDIO | These units had an intermittent no audio problem. The TA-16board had a broken shield ground connection. The shield is used as aground jumper and the solder connection between the board and this shieldwas broken. The broken connection occurred at the j | ||
Sony | SL2410 | REEL BEARING NOT AVAILABLE | Part comes up on computer(no longer available, see S/M orbulletin). -HQ COMMENTS: 3-646-185-00 (Bearing and Spacer) are replaced with3-646-572-00 (Bearing) and 3-646-573-00 (Spacer). S/B #197 will beupdated to include this model. | ||
Sony | SL2410 | NEW GUIDE PINS ARE HITTING CASSETTE LID WHILE LOADING | New guide pins are hitting cassette lid while loading result-ing in noisy operation. -HQ COMMENTS: You must use the part number in the S/M for the guide #1and #2. The pin kit A-6759-107-A cannot be used in this model. Part # needed: X-3669-429-0 | ||
Sony | SL2410 | INTERMITTENT PLAY MODE | Stop or P/B mode about 1/2 to 1 1/2 hrs. |