Marca | Modelo (Chassis) | Sintoma | Causa | Solução | Por: |
---|---|---|---|---|---|
Sony | SL2300 | CASSETTE EJECTS RIGHT AFTER THREADING COMPLETION | Intermittently, when cassette is inserted, unit will threadnormally, then eject after a few seconds. If cassette is threadedmanually, all functions would work. | ||
Sony | SL2300 | ERRATIC SYSTEM CONTROL | Only function that worked correctly was PLAY. If you selectedFF unit went to PLAY/REW, went to PLAY/PAUSE/RECORD/FF SEARCH. | ||
Sony | SL2300 | SERVO WILL NOT LOCK UP | Both units, servo will not lock up. On the SS-25 board theconnections at R12 and R17 were carbonized. Removed the old solder. | ||
Sony | SL2300 | 24 HR CLOCK | The clock was reading as a 24 hour clock (military time). | ||
Sony | SL2300 | VIDEO HEADS TOO TIGHT | In order to remove the head for replacement, one must usemuch force as the mechanical fit is too tight. The servicer has had twoin the last 2 months. One new head was defective and the Parts Dept. didnot want to exchange it as it was all scratched up. | ||
Sony | SL2300 | REPEATED FAILURES OF IC1 ON RP-8 BOARD | Loss of alternate video fields from heads. Discovered IC-1channel A not passing signal. | ||
Sony | SL2300 | POWER LIGHT STAYS ON | Pushing of timer record button would cause power light tostay on and the tape would eject. |