Dicas Reparação
Modelo - Chassis SL10
Pesquisa: SL10 Enviar Dica Resolvida
Resultados 16
Pedir dica reparação
| Marca | Modelo (Chassis) | Sintoma | Causa | Solução | Por: |
|---|---|---|---|---|---|
| Sony | SL100 | NO POWER - NO DISPLAY REPLACE R-6 ON PS-96 BOARD | No display and no power. No -29V from power supply. | ||
| Sony | SL10 | NEW FRONT LOADING ASSEMBLY INSTALLED, DOOR DOES NOT WORK | The teeth on the cassette door are too short for the newloading assembly. Do I have to put in a new door? -HQ COMMENTS: Yes, there was a production change and a new door underthe same part number will have the longer teeth and fit the new loadingassemb | ||
| Sony | SL100 | CAPSTAN SPEED IS SLOW | When I played back BII tape, sound is slow, and also pictureis distorted. | ||
| Sony | SL100 | WON'T RECORD VIDEO | Won't record video, audio record and audio/video PB OK. | ||
| Sony | SL100 | NO FUNCTIONS, TAPE STUCK | No functions, pause light on all the time, with power on capsand drum both running. | ||
| Sony | SL100 | UNIT SHUTS DOWN | When reel is turned by hand with original part waveform wasintermittent. With four new PC-101 -HQ COMMENTS: After replacing the PC101 (SP1201-22) on the RD-21 board,we have found no problem. I have found that the painted white dotindicate Pin 1 of PC1 | ||
| Sony | SL100 | WILL NOT ACCEPT TAPE | Will not accept tape. | ||
| Sony | SL100 | POOR VIDEO | Unit displayed poor video. Looked like bad heads. (B) headmissing from envelope. | ||
| Sony | SL10 | VERTICAL COLOR BARS, BAD SOUND, BAD VIDEO | Very weak picture, vertical color bars and sound verydistorted. Found 9VDC on IC1 reading 6.5 volts. | ||
| Sony | SL10 | WOW AND FLUTTER IN SOUND, PICTURE OK | Wow and flutter, picture OK. Removed the tension assy andlightly sanded the supply reel assy. Note: This is the second unit. Didthe same thing to a SL-25, see FPR. H0402. | ||
| Sony | SL10 | WILL NOT LOAD, DRUM SPINS VERY SLOWLY | IC201 was blown. Replaced IC201, loading was very slow, thenjammed. Found solder between teeth on gear (D) (Ref 269, P98). Removedsolder and reassembled. Loading action was restored, but drum motor ranvery slow in play, and would run slowly even in s | ||
| Sony | SL10 | EATS TAPE | Eats tape. | ||
| Sony | SL10 | EATS TAPE, INTERMITTENT LOSS OF FG | Eats tapes. Capstan speed overruns, spilling tape. | ||
| Sony | SL10 | SOLENOID PLUNGER | The original part # 1-454-349-41 was subbed to 1-454-365-51.The new solenoid fit the unit, but the collar on the plunger would notclear the mounting pieces on the unit. The original plunger had nocollar. We need to have the plunger changed on this sub. | ||
| Sony | SL10 | NEGATIVE PICTURE | Negative picture and no sync on E-E and PB. |