Marca | Modelo (Chassis) | Sintoma | Causa | Solução | Por: |
---|---|---|---|---|---|
Sony | PSFL99 | ARM DROPS TOO FAST - TIGHTEN LIFTER ASSY REF. #217 | Tonearm drops onto record without any damping. | ||
Sony | PSFL9 | P/N FOR UPPER FRAME ASSY | Need part # for upper frame assy. -HQ COMMENTS: The part number is 4-905-866-01. The number is listed onPage 43 as Ref. No. 113. | ||
Sony | PSFL9 | INCORRECT SET DOWN MOD. | Need part # for modification. -HQ COMMENTS: Install edge-detection board (P/N X-4906-107-1).A diagram is available for installation. | ||
Sony | PSFL9 | INTERMITTENT BINDING OF TONE ARM | The customer said that about once a week the tone arm wouldstall about one third of the way into the record. It was then necessaryto nudge the arm while engaging the arm transport. We found the guide barto be slightly bent and hanging up the tone arm. | ||
Sony | PSFL9 | PART NOT AVAILABLE - UP/DOWN COIL | My servicer ordered the part (#1-422-162-11), KC sent a notethat the part was no longer available. | ||
Sony | PSFL9 | TONEARM DROPS TOO QUICKLY | Cue drop not damped. Occasionally the tonearm would wobblelaterally on the way down. | ||
Sony | PSFL9 | ECCENTRIC LOADING GEAR | Loading gear was slightly eccentric which cause the module todrag when loading. | ||
Sony | PSFL9 | NO FUNCTION CONTROL | No function control and erratic display. | ||
Sony | PSFL9 | IRREGULAR GUIDE BAR | The unit preformed very well except that when the tone armreturned to the rest position it would vibrate during the last inch oftravel. We found the guide bar to be slightly irregular causing the tonearm to slightly bind and vibrate. |