Dicas Reparação
Modelo - Chassis MZ2P
Pesquisa: MZ2P Enviar Dica Resolvida
Resultados 9
Pedir dica reparação
| Marca | Modelo (Chassis) | Sintoma | Causa | Solução | Por: |
|---|---|---|---|---|---|
| Sony | MZ2P | GEARS STRIP | Worm wheel stripped 2 months after it was replaced. Thisgear is meshed with a brass worm gear is this a potention problem? | ||
| Sony | MZ2P | NEW TEST DISC AVAILABLE, TYPE TDYS-1 (PART # 4-963-646-01) | A new test disc is available, type TDYS-1, under part #4-963-646-01. Its predecessor, type TGYS-1, is still acceptable foradjustments and troubleshooting. | ||
| Sony | MZ2P | PART # CORRECTION, OPTICAL DEVICE (ORDER P/N 8-583-001-21) | Part # of replacement optic is listed wrong in supplement 3. | ||
| Sony | MZ2P | WON'T EJECT DISC: SHUTTER BLOCKS OPENING (RE-ADJUST REF. 59) | Several units have come in with discs stuck in the mechanismwhich could only be freed up by disassembling the cabinet and moving thereddish brown shutter panel out of the way while activating EJECT. | ||
| Sony | MZ2P | LOADING/UNLOADING DIFFICULTY, LOADING MOTOR M-703 DEFECTIVE | Disc was stuck inside unit. Once it was removed, the discwould load but it loaded a bit slow. | ||
| Sony | MZ2P | DOES NOT WORK WITH AC ADAPTOR (FUSIBLE LINK PS-401 OPEN) | The unit does not operate when powered by the AC adaptor only.The unit works fine if the battery pack is installed and is chargedsufficiently, but the battery pack is not charging when the AC adaptor isplugged in. | ||
| Sony | MZ2P | UNUSUAL SOUNDING AUDIO CAUSED BY DEFECTIVE FILTER LF-304 | Audio from line out sounded strange, as if the left channelwas comming out of both speakers. | ||
| Sony | MZ2P | FORWARD/REVERSE SCAN DOES NOT WORK AFTER REPLACING TOP COVER | Forward and reverse scan will not work after replacing the topcover assembly. The shuttle B Ring assembly (ref. 5) which is suppliedwith the top cover is different from the original one on the unit beingrepaired. | ||
| Sony | MZ2P | "DISC INSIDE" SHUTTER DOES NOT CLOSE (MECHANISM BENT) | The Disc Inside shutter would not close fully. The customerhad dropped the unit. |