Dicas Reparação




Modelo - Chassis MZ


Pesquisa: MZ Enviar Dica Resolvida
Resultados 96
Pedir dica reparação
MarcaModelo
(Chassis)
SintomaCausaSoluçãoPor:
SonyMZR2
WON'T PLAY OUTER TRACK (FOUND HINGE HOLDER ON REF 706 LOOSE) Will not track on outside tracks, and will not turn off,unless you are on a track that is playing.
SonyMZE2
DISTORTED AUDIO, OR WON'T READ DISCS (SEE AUD BULLETIN 345) The unit may have distorted audio, or may not read discs.
SonyMZ2P
NEW TEST DISC AVAILABLE, TYPE TDYS-1 (PART # 4-963-646-01) A new test disc is available, type TDYS-1, under part #4-963-646-01. Its predecessor, type TGYS-1, is still acceptable foradjustments and troubleshooting.
SonyMZ1
DOES NOT RECORD DIGITAL INPUT SIGNALS (FB307 MAY BE OPEN) The unit may not record digital input signals, and the displayshows aIN Analog.
SonyMZ1
NEW TEST DISC AVAILABLE, TYPE TDYS-1 (PART # 4-963-646-01) A new test disc is available, type TDYS-1, under part #4-963-646-01. Its predecessor, type TGYS-1, is still acceptable foradjustments and troubleshooting.
SonyMZ1
UNIT LOCKS UP AFTER 13 SECS IN REC (REPLACED S705) Unit went into rec and display would lock up at 13 secs. TOCedit never showed up. Also, when STOP pushed, unit would totally lock up.
SonyMZ1
INT. NO PLAY, INT. LOCK UP (REPLACED POWER BOARD, REF. 79) Unit heats up over time & will lock up during play or rec.May take 4-5 hours to show up.
SonyMZR2
NO AUDIO FROM LINE OUT JACK - REPLACED MAIN BOARD Intermittent audio from line out jack left channel only.Found extremely thin, very difficult to see, crack along line out jack.Also found several intermittent solder connects and feed thrus whiletracing audio back thru main board from Q102, 202 to IC311,
SonyMZR2
INTERMITTENT POWER FROM ADAPTOR - RESOLDERED CN801 Intermittent power to unit when using AC adaptor, found flexboard that runs from D-D converter to CN801 on main board had brokenconnections on D-D conv. side.
SonyMZ1
POPPING IN AUDIO REC FROM DIGITAL IN ONLY Popping in audio, but only from digital source, analog recok.
SonyMZR2
NO FUNCTIONS (PRESSING THE RESET BUTTON RESTORED NORMAL OP) The unit had no functions.
SonyMZR2
DOES NOT RECORD, ERASES EXISTING RECORDINGS Unit would not make new recordings. If recording on a discwhich already contained previous recordings, the previous recordings wouldbe erased.
SonyMZR2
NO FUNCTIONS (FOUND CORROSION AROUND IC805 AND X803) The unit had no functions. Found corrosion around IC805 andX803.
SonyMZR2
INTERMITTENT SKIPPING ON CD-TYPE DISCS (ADJUSTED RF LEVEL) The unit would skip intermittently when playing CD-type discs(PIT discs).
SonyMZR2
DISPLAYS "DISC ERROR" (FOUND LIMIT SWITCH STUCK) The unit would always display DISC ERROR.


Assistência TécnicaAs dicas apresentadas destinam-se a técnicos de eletrónica, a tentativa de reparação ou assistência sem ter conhecimentos de eletricidade e eletrónica, podem provocar danos mais graves aos equipamentos e, devido a tensões muito elevadas em alguns circuitos, graves danos fisicos que podem constituir um risco em determinadas reparações.

Não arrisque reparar equipamentos com tensões elevadas se não tiver conhecimentos técnicos para o fazer em segurança.

Verifique se o esquema está disponível na área de downloads