Dicas Reparação
Modelo - Chassis MDS101
Pesquisa: MDS101 Enviar Dica Resolvida
Resultados 6
Pedir dica reparação
| Marca | Modelo (Chassis) | Sintoma | Causa | Solução | Por: |
|---|---|---|---|---|---|
| Sony | MDS101 | INTERMITTANT RIGHT CHANNEL - RESOLDERED J501 | Found J501 had cold soldered joint. | ||
| Sony | MDS101 | UNIT STUCK IN STANDBY MODE - RE-POSITION JAMMED EJECT SWITCH | Unit stuck in standby. EJECT button constantly depressed. | ||
| Sony | MDS101 | WOULD NOT EJECT DISC - REPL MISSING WASHER, REF.# 52 | Unit would not eject disc. Washer on top left cover of sliderassy missing, which misaligned mech and made disc sit incorrectly. | ||
| Sony | MDS101 | AUTO TRACK MARKING FEATURE: DESCRIPTION | The operation of the automatic track marking feature (whenusing the analog input) is not described in the service manual. -HQ COMMENTS: The MDS-101 will mark a new track number when the analoginput is seeing a -45dB signal for a minimum of 2 seconds. | ||
| Sony | MDS101 | UNIT ERASES DISC EVERY TIME A RECORDING IS TRIED - CHANGE HD | Unit would go into record but when trying to playback therecording it would show blank disc. The record head being bent is usuallythe problem when the disc is erased but in this case it was not bent andit measured fine. | ||
| Sony | MDS101 | "DISC ERROR" DISPLAYED (REPLACE OPT. ASSY, P/N 8-583-003-21) | Display reads DISC ERROR and then ejects the disc (it willtry reading the disc for about 10 seconds then ejects). When I faked theunit into the loaded position without a disc the sled would go to thehome position but would not focus search. I checked th |