Dicas Reparação
Modelo - Chassis LBTG2000
Pesquisa: LBTG2000 Enviar Dica Resolvida
Resultados 7
Pedir dica reparação
| Marca | Modelo (Chassis) | Sintoma | Causa | Solução | Por: |
|---|---|---|---|---|---|
| Sony | LBTG2000 | NO POWER DISPLAY ONLY WORKS - D1301 COLD SOLDER | Display lit up but unit had no audio or cd functions. Found no dc voltages anywhere. Main rectified D1301 cold soldered. | ||
| Sony | LBTG2000 | NO AUDIO FROM TAPE - RECONNECT CBLES FRM TAPE DK TO MAIN BD | Wires that lead from tape deck to main board not connected. | ||
| Sony | LBTG2000 | WON'T OPEN | Won't open. | ||
| Sony | LBTG2000 | NO CD AUDIO - REPLACE K103 | No CD audio with disc playing. Found no audio from D-A converter, K103. | ||
| Sony | LBTG2000 | TAPE PLAYER WON'T ENGAGE IN PLAY-REMOVE EXCESS GLUE FRM LEVR | A tape deck would shut off immediately when play is pressed. Found excess loc-tite had dripped down from azimuth screw #357, onto lever preventing it from alinging to enable play even with no tape mounted. | ||
| Sony | LBTG2000 | UNIT STUCK IN TUNER MODE - REPLACE IC1002 | Unit would output only radio on CD or tuner and nothing in any other mode. Found pions 9 & 10 on IC1002 switching values correct as the function switches were pressed, but IC not switching correctly. | ||
| Sony | LBTG2000 | NO AUDIO TAPE - RECONNECT CABLE FROM TAPE DECK TO MAIN BOARD | Cable that leads from tape deck to main board was not connected. |