Dicas Reparação
Modelo - Chassis KV8100
Pesquisa: KV8100 Enviar Dica Resolvida
Resultados 7
Pedir dica reparação
| Marca | Modelo (Chassis) | Sintoma | Causa | Solução | Por: |
|---|---|---|---|---|---|
| Sony | KV8100 | MISSING P/N FOR NEON LAMP | Need P/N for neon lamp used for channel indicationNL2201-2214. -HQ COMMENTS: KV-1546 has the same neon drive IC. According to S/M ofKV-1546, P/N for NL is 1-519-154-00. Also, we are reporting this matterto Tokyo. | ||
| Sony | KV8100 | P/N MISSING FOR CHANNEL SWITHCES | Customer wants to replace channel switches. Schematic showsRef. #does not list parts. -HQ COMMENTS: The P/N for S2201-S2214 switches is 1-553-329-00 (see CTVS/B 146). | ||
| Sony | KV8100 | PART FAILURES | End user reports all of their units have had this capfail at least once. Sometimes, the other parts in the centering circuithave failed also. -HQ COMMENTS: To lessen the overcurrent stress on C519/2.2uF/160V, plsuse two 1uF/200V (P/N 1-130-157-00) capa | ||
| Sony | KV8100 | PART NUMBERS | I need part numbers of RV303, 305, 306 and 304. -HQ COMMENTS: The part No. are as follows: RV303 1-226-506-11 Brt RV305 1-224-146-11 Color RV306 1-224-146-11 Hue | ||
| Sony | KV8100 | UNIT SHUTS DOWN | When turned on, unit would shut down. Isolated problem tothe 22 volt line. It was reading 27 volts. Found Q602 regulatordriver leaky. | ||
| Sony | KV8100 | DEAD | No picture or sound when power was turned on. This symptomoccurred when unit was cold or after setting for several hours. | ||
| Sony | KV8100 | ON/OFF SWITCH WOULD NOT WORK | Cust. is using KV8100 with a VHS machine on a boat. Both TVand VHS are on 12VDC. The KV8100 will not shut off with on/off switch. -HQ COMMENTS: We can try to go around that by insertive RC separator(10 kohm in parallel with 0.01u) into the cable conne |