Dicas Reparação




Modelo - Chassis KV32XBR15


Pesquisa: KV32XBR15 Enviar Dica Resolvida
Resultados 38
Pedir dica reparação
MarcaModelo
(Chassis)
SintomaCausaSoluçãoPor:
SonyKV32XBR15
INTERMITTENT HORIZONTAL SHIFT TO RIGHT, RE-SOLDERED IC-582 Intermittent picture is shifted to the right - no color anddark. When you turn the set on and off, unit will work ok.
SonyKV32XBR15
NO PICTURE, TROUBLESHOOTING HINTS FOR IC-301 (IK LINE) As you may have noticed, when servicing this and other unitsusing this particular IC-301, RGB lines at the IC level are blanked any-time the C board is disconnected. The main reason for this blanking isa cathode current detect line (IK). When the unit
SonyKV32XBR15
VERTICAL RETRACE LINES, RE-SOLDERED C-504 ("A" BOARD) I have now seen several models, ANU-1 chassis that exhibitwhat looks to be an odd type of retrace at the bottom of the screen.There may also be a few lines missing in the middle of the screen. It isunlike vertical problems I have seen in the past. The
SonyKV32XBR15
NO MANUAL POWER ON, CHANGE C-125 TO 2.2/50V BI-POLAR Unit has no manual power on/off. There is a hole for D-106in reset circuit. No component is there, instead there should be C-115.If diode is inserted in reverse direction unit will work. In manual powermade, unit has a power and reset pulse required t
SonyKV32XBR15
INPUT ADJUSTMENTS CAN BE CHANGED FOR EACH INPUT, SEE SB # 39 BRT/COLOR/HUE/SHARP on some input(s) is ok, on some otherinput(s) is excessive/distorted.
SonyKV32XBR15
NO VOLUME CONTROL, REPLACED IC-251 Unit displayed multiple audio problems. Volume on screendisplay operated normally. Sound volume was stuck at approximately halfvolume. If a change was made, it would not appear until channels werechanged. Have had two other reports of this symptom.
SonyKV32XBR15
GREEN CHILD PICTURE Green child picture
SonyKV32XBR15
SRS SOUND, REPLACED SRS MODULE Sound is garbled. The SSC home tech replaced the SRS soundmodule because the sound was distanted and garbled at any level ofvolume.


Assistência TécnicaAs dicas apresentadas destinam-se a técnicos de eletrónica, a tentativa de reparação ou assistência sem ter conhecimentos de eletricidade e eletrónica, podem provocar danos mais graves aos equipamentos e, devido a tensões muito elevadas em alguns circuitos, graves danos fisicos que podem constituir um risco em determinadas reparações.

Não arrisque reparar equipamentos com tensões elevadas se não tiver conhecimentos técnicos para o fazer em segurança.

Verifique se o esquema está disponível na área de downloads