Dicas Reparação
Modelo - Chassis KV2726R
Pesquisa: KV2726R Enviar Dica Resolvida
Resultados 4
Pedir dica reparação
| Marca | Modelo (Chassis) | Sintoma | Causa | Solução | Por: |
|---|---|---|---|---|---|
| Sony | KV2726R | SET IN SLEEP MODE AT TURN-ON, REPLACE IC-101 CONTROLLER | When set was turned on, it was in the sleep mode per non-authorized servicer. After several checks, found pin 15 of IC-102(memory) to read zero volts. Isolated pin 15 and 5 volts would appear onthe 5 volt line. All other readings were good. With pin | ||
| Sony | KV2726R | NARROW DIM RASTER (PIN-CUSHION DISTORTION), REPLACE R-512 | Narrow dim raster exhibiting pin-cushion distortion along withR-554 overheating on the (D) board. | ||
| Sony | KV2726R | DEAD SET, REPLACE T1505, Q1502, IC651, R651 AND R605 | Failure of R605, R651, IC651, Q1502, T1505 Claim No.DM39461-4/Aid Electronics - Indy. -HQ COMMENTS: Thank you very much for your report. | ||
| Sony | KV2726R | AUDIO BUZZ ON CABLE, REPLACE IF BLOCK | Servicer reports the set has an audio buzz on cable channel 4only. They are unable to pickup CH 4 on an antenna. |