Dicas Reparação




Modelo - Chassis KV1981R


Pesquisa: KV1981R Enviar Dica Resolvida
Resultados 8
Pedir dica reparação
MarcaModelo
(Chassis)
SintomaCausaSoluçãoPor:
SonyKV1981R
NO MAIN AUDIO - LOW SAP OUTPUT, REPLACE IC-810 Unit came in with multiple problems (lightning damage) inclu-ding no audio, IC-810 was changed, still no main audio, some SAP. InputMPX (pin 1, IC-810) was present. Pin 14 showed 0V (SAP mute) pin 29 (L &R out) had output but no signal on the other sid
SonyKV1981R
WRONG PART NUMBER, D491 USE 8-719-92-53 Wrong part number. If install diode above it will short outafter overheating.
SonyKV1981R
SHUT DOWN, REPLACED OPEN Q502 AND SHORTED C553 No picture, then unit shuts off.
SonyKV1981R
INTERMITTENT BRIGHT GLOW, R545 WRONG VALUE Customer complained of intermittent bright glow across topof CRT. Inspection revealed possible cause was over-scan because I couldnot reduce vertical size.
SonyKV1981R
INTERMITTENT VIDEO AND SOUND, REPLACE T251 Intermittently the picture would turn white and the soundwould become noisy. This is in the tuner mode. Also with no antennathere was no snow present.
SonyKV1981R
UNIT POWERS UP BUT NO SOUND/PICTURE, REPLACE V OUT IC501 The unit would power up but there was no sound or picture.Also it was not possible to shut the set off with the front panel control.The problem looked like trouble with the upc. However, we noticed thatthere was no vert. pulse which is necessary for pro
SonyKV1981R
NO DISPLAY, OPEN L101 Unit had no on screen display. Found L101 open.
SonyKV1981R
CANNOT TURN OFF SET, REPLACE IC103 After set on for a couple of hours press power button pixgoes black then comes back. Picture setting is at minimum when pixreturns.


Assistência TécnicaAs dicas apresentadas destinam-se a técnicos de eletrónica, a tentativa de reparação ou assistência sem ter conhecimentos de eletricidade e eletrónica, podem provocar danos mais graves aos equipamentos e, devido a tensões muito elevadas em alguns circuitos, graves danos fisicos que podem constituir um risco em determinadas reparações.

Não arrisque reparar equipamentos com tensões elevadas se não tiver conhecimentos técnicos para o fazer em segurança.

Verifique se o esquema está disponível na área de downloads