Dicas Reparação




Modelo - Chassis KPR4150


Pesquisa: KPR4150 Enviar Dica Resolvida
Resultados 7
Pedir dica reparação
MarcaModelo
(Chassis)
SintomaCausaSoluçãoPor:
SonyKPR4150
RED REGISTRATION OFF The unit has bad registration with Red. Replaced Red registration IC6, but did not correct problem. Center of screen ok, but outer edges off by one inch and size and linearity controls had little effect.
SonyKPR4150
DISTORTED PICTURE ON HIGH BRIGHTNESS With high brightness items on the screen, picture would skew.
SonyKPR4150
BROKEN SPEAKER GRILLE CHIPS Please note the attached parts. These are mounted to thespeaker grille and hold it in place. Sometimes the clips get damaged inshipping, etc. and it becomes necessary to replace them. Is there aseparate part number for the clips or must the whole gril
SonyKPR4150
NO RASTER, NO DISPLAY, SLEEP LIGHT ON Set would come on with Hi voltage, no raster, no display,sleep light on. Found 15VDC missing, trouble was traced to L8, 5.6uHchoke opened.
SonyKPR4150
INVERTED IMAGE, REPLACE LENS, SEE S/B TVP0302 In reference to FPR Sept 1, the improved green lens wasinstalled. Technician informed me there was a 90% improvement. Theinverted image had all but dissappeared. He said that in a total darkroom and only with certain screens an inverted image could be
SonyKPR4150
RAINBOW AFFECT At night, only you get like a half moon reflection on thescreen. If the person has a red tie and dark suit you notice this. -HQ COMMENTS: It appears to be an adjustment problem. To investigatethat possibility, display cross-hatch pattern (generated in
SonyKPR4150
NO TURN ON When power is turned on, only sleep light would come on.Found F3 (2.5A) fuse blown. At full voltage, the +18 volt line draws2.4A. At normal voltage, the +18 volt line draws 1.5A-2A. At lowvoltage, the +18 volt line draws 1.0A. After fuse replacement


Assistência TécnicaAs dicas apresentadas destinam-se a técnicos de eletrónica, a tentativa de reparação ou assistência sem ter conhecimentos de eletricidade e eletrónica, podem provocar danos mais graves aos equipamentos e, devido a tensões muito elevadas em alguns circuitos, graves danos fisicos que podem constituir um risco em determinadas reparações.

Não arrisque reparar equipamentos com tensões elevadas se não tiver conhecimentos técnicos para o fazer em segurança.

Verifique se o esquema está disponível na área de downloads