Dicas Reparação




Modelo - Chassis HCDH1600


Pesquisa: HCDH1600 Enviar Dica Resolvida
Resultados 8
Pedir dica reparação
MarcaModelo
(Chassis)
SintomaCausaSoluçãoPor:
SonyHCDH1600
CD DOOR WILL NOT STAY CLOSED - REPLACED OPTICS Door will not stay closed after opening first time. Othersymptoms are no focus search.
SonyHCDH1600
AFTER TIME, CD IN/OP - ICP952 OPEN When I push CD play, after unit reads TOC, it plays thefirst song, but the second song won't play. Cassette was also in/op.I found resistor fusable ICP952 open.
SonyHCDH1600
NO RECEPTION FROM RADIO - R9001 OPEN P/N 1-212-942-00 No AM/FM reception. Tuner cannot lock onto station. I found12v supply from Q283 was missing. The 12v supply was missing becauseR9001 was open at Power Board. Pin 11 of IC801 was at 22.5v.
SonyHCDH1600
TUNER DOESN'T RECEIVE STEREO WHEN SCAN BUTTON HELD ON REMOTE When the presets are scanned by holding the scan buttondepressed on the remote control, the tuner will not come up in stereo modewhen the destination station is reached. If the user single steps throughthe presets, the unit works correctly.
SonyHCDH1600
INCORRECT BD BOARD (REF 155) P/N LISTED IN S/M There are two part numbers listed in the S/M for the BDboard. On page 35, item 155 the number is A-4617-759-A. On page 36, thesame board is listed as A-4617-936-A. When looking at these boards, thereis a substantial difference among them.
SonyHCDH1600
SUBSTITUTE IC-205 REQUIRES CIRCUIT CHANGES - D-101 FAILS KCP automatically subs this chip to a CXA1492AQ, part number8-759-058-95. When you install the new device, D-201 fails and the newchip may fail also.
SonyHCDH1600
NO AM OR FM AND DISPLAY WAS OK IC-21 on TCB-011, no oscillator on pins 1 and 24 and no B+ onpin 20 (approximately 1V).
SonyHCDH1600
IMPROPER DISPLAY-NO AUDIO-KAROKE DISPLAYED Improper display and Karoke displayed no audio. Also appliesto serial numbers 833136, 831285, 831283, 837739, 840166 and 846632.


Assistência TécnicaAs dicas apresentadas destinam-se a técnicos de eletrónica, a tentativa de reparação ou assistência sem ter conhecimentos de eletricidade e eletrónica, podem provocar danos mais graves aos equipamentos e, devido a tensões muito elevadas em alguns circuitos, graves danos fisicos que podem constituir um risco em determinadas reparações.

Não arrisque reparar equipamentos com tensões elevadas se não tiver conhecimentos técnicos para o fazer em segurança.

Verifique se o esquema está disponível na área de downloads