Marca | Modelo (Chassis) | Sintoma | Causa | Solução | Por: |
---|---|---|---|---|---|
Sony | HCD541 | CD DRAWER NOT OPENING - REPLACED IC321 | Unit sent in because cd drawer wouldn't open. Inspection found that cd display completely lit. | ||
Sony | HCD541 | UNIT DEAD - REPLACED C843 | Unit dead, + unreg. voltage is being supplied by SAW542.Reset voltage at Pin #4 or IC714 located on main PCB is low. In this caseit was measured at 2 volts. | ||
Sony | HCD541 | NO AUDIO IN NORMAL DUB, HI SPEED DUB CAN HEAR CHEEPING | In normal dub you cannot hear any audio, but in high speeddub, you can hear a cheeping sound. This sounds like it is reverse ofwhat it should be. Is this normal for this model? The servicer has 3units and they all do the same thing. If you play back | ||
Sony | HCD541 | ADAPTOR BD NOT POWERING THE UNIT PROPERLY | The adapter board, J-2501-074-A, that I received for use inadapting the power jig has a problem. When the board and cable are usedthe display is dim at the right edge. In addition, the CD spindle may ormay not work. The adaptor is being forwarded for you | ||
Sony | HCD541 | HCD541 TEST JIG - INCORRECT WIRING OF CABLE | Test jig for HCD 441 & 541 will not power up unit. | ||
Sony | HCD541 | NEED PART # FOR REEL CAP | Reel cap is shown in manual as not supplied. We need thepart #. | ||
Sony | HCD541 | UNIT WOULD NOT POWER UP - RESOLDERED CN701 ON MAIN BOARD | Only 1 or 2 lights on front panel would light @ power on.Visual inspection of main board showed broken solder joints on almost allpins of CN701. |