Dicas Reparação




Modelo - Chassis FDL380


Pesquisa: FDL380 Enviar Dica Resolvida
Resultados 8
Pedir dica reparação
MarcaModelo
(Chassis)
SintomaCausaSoluçãoPor:
SonyFDL380
NO POWER, REPLACED F601, Q603 AND SHORTED C603 Unit dead, F601 blown.
SonyFDL380
TV IS ALSO ON AT RADIO MODE, REMOVED SOLDER BRIDGE When switched to radio, TV also worked. TV would work aloneok. Power on/off ok.
SonyFDL380
INTERMITTENTLY LOSES PICTURE, REPLACED FL TUBE 1-519-563-11 Intermittently loses picture.
SonyFDL380
NO PICTURE RASTER ONLY, RE-SOLDERED CN801/PIN 11 No picture only very bright screen and can't controlbrightness. -SOLUTIOIN: Missing Neg 8v at CN801, Pin 11, due to cold solder atflyback T601, Pin 3. -HQ COMMENTS: Only report received on this symptom. Thanks for thereport.
SonyFDL380
EXCESSIVE BRIGHTNESS, REPLACED R345 The brightness was excessive.
SonyFDL380
SCREEN WOULD ONLY PLAY FOR 15 SECONDS, FLOURESCENT TUBE The set would run for fifteen seconds before it would blackout. The flourescent tube would darken on end and protection circuitwould kick in.
SonyFDL380
UNIT APPEARS TO BE DEAD, REPLACED TUBE Unit has no picture or sound.
SonyFDL380
LEGS ON VR-303 AND 304 ARE REVERSED, SEE CORRECTION # 1 Part received by servicer has legs reversed on it. Center legis toward adjustment side of VR and should be away from it. The reverseholds true for two outside legs. -HQ COMMENTS: Service manual correction # 1 covers this problem.Ref. In


Assistência TécnicaAs dicas apresentadas destinam-se a técnicos de eletrónica, a tentativa de reparação ou assistência sem ter conhecimentos de eletricidade e eletrónica, podem provocar danos mais graves aos equipamentos e, devido a tensões muito elevadas em alguns circuitos, graves danos fisicos que podem constituir um risco em determinadas reparações.

Não arrisque reparar equipamentos com tensões elevadas se não tiver conhecimentos técnicos para o fazer em segurança.

Verifique se o esquema está disponível na área de downloads