Marca | Modelo (Chassis) | Sintoma | Causa | Solução | Por: |
---|---|---|---|---|---|
Sony | DTX10 | DISPLAYS ERR E-88 WHILE PLAYING TAPE @ 32KHZ, THEN EJECTS | On low speed (32 KHz) the unit plays 10 seconds, thendisplays E-88 and ejects the tape. Sometimes it plays OK on high speed(48 KHz). | ||
Sony | DTX10 | PART NUMBER FOR LED HOLDER (3-365-233-01) | The service manual shows the plastic bracket which holds theLED D901 as not supplied. -HQ COMMENTS: The part number for the holder is 3-365-233-01. | ||
Sony | DTX10 | MUSIC DROPOUT | After playing for an hour, music would dropout. | ||
Sony | DTX10 | COMPATIBILITY PROBLEM: MAIN BOARD CN-791/POWER BOARD CN-971 | There can be two types of power supply-to-main boardconfigurations. Early production will have 11 pins connecting CN-791 onmain board to CN-971 on the power supply. If main board is replaced,CN-791 will be 6 pins instead of 11. | ||
Sony | DTX10 | WILL NOT LOAD TAPE | DAT MD assembly will not load tape. Found the mounting postfor Reference No. 103 gear (C2) was loose where connected to guide (L)assembly. This caused the loading gears to jam, locking up the loadingassembly. | ||
Sony | DTX10 | CASSETTE DOESN'T LOAD INTO UNIT, LOADING GEARS BROKEN | Unit had broken gears (ref. 106-108). | ||
Sony | DTX10 | SCHEMATIC DISCREPENCY: D-D CONVERTER +7.5 VOLT LINE | There is obviously something missing or drawn erroneously onthe power board schematic (page 46 of the service manual, coordinates M35). The 7.5V line (pin 7) is shown as being directly connected tothe 12V backup line (pin 1). What is the correct route |