Dicas Reparação
Modelo - Chassis CFD30
Pesquisa: CFD30 Enviar Dica Resolvida
Resultados 11
Pedir dica reparação
| Marca | Modelo (Chassis) | Sintoma | Causa | Solução | Por: |
|---|---|---|---|---|---|
| Sony | CFD30 | IC201 KEEPS GOING OUT | Unit came in with IC201 out. Servicer replaced andreturned to customer. Customer returned unit with IC out again. Servicerreplaced again and it played for three hours and went out again. Whenoperating all voltages on IC are normal and there is no r | ||
| Sony | CFD30 | DIFFICULT REMOVAL/REINSTALLATION OF CD CHASSIS | CD chassis difficult to remove and reinstall. This can breakthe function switch & am/fm switch. | ||
| Sony | CFD30 | CD WILL NOT PLAY, SHUTDOWN BEFORE TOC, REPLACE IC705 | Disc would spin, display would black out, could not startup unless unit was unplugged. | ||
| Sony | CFD30 | TAPE NO PLAY | Pinch rollers and head will change direction but take up reelsdon't move. Pinch arm heavy spring pops out of groove. Approx 2% ofrepairs. | ||
| Sony | CFD30 | TAPE MOTOR REPLACEMENT | Ordered 3 new tape motors and all three turned backwards(counter clockwise). | ||
| Sony | CFD30 | NO AM - REPLACE ANTENNA L3, P/N 1-402-508-11 | Snapped out ferrite rod antenna L3, causing the coil wiresto break out. Also pertains to units, ser# 9239715 and 2030184. | ||
| Sony | CFD30 | NO SOUND IN TAPE MODE - REPLACE S202 RECORD SWITCH. | Unit had wrong RECORD switch installed. It should bemomentary contact, but was actually of the push-push variety, just likethe bass boost switch (169218011). | ||
| Sony | CFD30 | TAPE-NO FWD PLAY | Head does not align because lever, fan, type becomes worn/bent. So many of these occurred, a part number separate from REC/PB head assy is needed. | ||
| Sony | CFD30 | TAPE DECK BUTTONS WILL NOT LOCK IN PLACE | Tape deck buttons will not lock in place. Duringmanufacturing the tape deck buttons are glued onto the levers,corresponding to their function with excess glue running down the leveraway from the buttons becoming hard and preventing the levers from lock | ||
| Sony | CFD30 | PLASTIC CD HOLDER BREAKS | Plastic CD holder breaks at screw lobe near spindle motor. Isuspect that the cause is there is too much weight for 1 screw lobe tohold. I suggest modifying the CD Holder, reference 103 by adding ribbedsupports on the spindle motor end of the holder. -HQ | ||
| Sony | CFD30 | INTERMITTENT PICK-UP CD | Intermittent reads TOC play. Also pertains to serial number0188322. |