Marca | Modelo (Chassis) | Sintoma | Causa | Solução | Por: |
---|---|---|---|---|---|
Sony | CDX5290 | CD DOES NOT PLAY, DISPLAY READS E-04 | The LCD display of the unit reads E-04. This may be caused bythe CD making contact with the chucking arm (ref# 122). This may cause theCD not to spin and eventually displaying an error message. | ||
Sony | CDX5290 | OPTICAL PICKUP/SERVO BOARD INCOMPATIBILITY (KSS-410A/313A) | The unit came in for service with type KSS-313A opticalpickup, which was defective. The type shown in the service manual isKSS-410A, which was ordered from NPC and installed in the unit, but thispickup did not work in the customer's unit. | ||
Sony | CDX5290 | NO AUDIO (FOUND AMP IC303 DEFECTIVE) | No audio. | ||
Sony | CDX5290 | UNEXPLAINED ERROR CODE IN TEST MODE: "E-A0" | An unexplained error code appeared on the display while in thetest mode. The code is E-A0. -HQ COMMENTS: Tokyo told us that program bugs may account forunexplained error codes. In this particular case, the E-A0 appears whenthe unit tried to eject the | ||
Sony | CDX5290 | ERROR CODE E44 | Servicer has unit that customer complained it dropped out oncein awhile. Servicer has not been able to duplice problem. Put unit intest mode. After 6 hours of playing E44 came up on display but unit kepton playing. Noted FPR 03252. Here's another er | ||
Sony | CDX5290 | DISPLAY FAILURES (MISSING SEGMENTS, CRACKED LCD, ETC.) | Various display failures have been noted, such as missingsegments, cracked LCD, segments always illuminated, etc. | ||
Sony | CDX5290 | CLICKING DURING LOADING, THEN CD IS EJECTED | CD loads and makes continuous mech noise (clicking) then unitwill eject CD. Found one of the arms of the roller assembly slightly bentbackward causing gears to engage during CD loading. | ||
Sony | CDX5290 | PART NUMBER CORRECTION: LCD801 (CORRECT # IS 1-810-847-21) | On page 42 of service manual LCD801 has wrong part number.Correct part number is 1-810-847-21. -HQ COMMENTS: Thank-you for pointing out this error. We will issue aservice bulletin. -See Car Stereo bulletin # 379 for details. | ||
Sony | CDX5290 | REMOVING KEYSWITCHES (USE PYRO-PEN JR. ON SETTING # 1) | The keyswitches may be difficult to remove without damagingthe PCB. | ||
Sony | CDX5290 | KEYSWITCHES FAIL | The keyswitches fail. It is most often the SELECT key butcould be any key. Sometimes there are more than 1 bad switch on the samefaceplate. -HQ COMMENTS: The QA group in Tokyo has been notified and samples havebeen sent to them. An improved switch ha |