Dicas Reparação
Modelo - Chassis CDX5270
Pesquisa: CDX5270 Enviar Dica Resolvida
Resultados 11
Pedir dica reparação
| Marca | Modelo (Chassis) | Sintoma | Causa | Solução | Por: |
|---|---|---|---|---|---|
| Sony | CDX5270 | CD DOES NOT PLAY, DISPLAY READS E-04 | The LCD display of the unit reads E-04. This may be caused bythe CD making contact with the chucking arm (ref# 122). This may cause theCD not to spin and eventually displaying an error message. | ||
| Sony | CDX5270 | UNEXPLAINED ERROR CODE IN TEST MODE: "E-A0" | An unexplained error code appeared on the display while in thetest mode. The code is E-A0. -HQ COMMENTS: Tokyo told us that program bugs may account forunexplained error codes. In this particular case, the E-A0 appears whenthe unit tried to eject the | ||
| Sony | CDX5270 | ERROR CODE E44 | Servicer has unit that customer complained it dropped out oncein awhile. Servicer has not been able to duplice problem. Put unit intest mode. After 6 hours of playing E44 came up on display but unit kepton playing. Noted FPR 03252. Here's another er | ||
| Sony | CDX5270 | SKIPS WHEN CAR IS MOVING (REPLACED BROKEN DAMPER SHAFT) | CD skips when car turns corners, shifts gears or anyirregular motion. Found one of the damper shafts broken (ref. 117)causing optical chassis assy's (ref. 157) suspension to be uneven. Thisresults in skipping all the time. | ||
| Sony | CDX5270 | TEST MODE ERROR CODES EXPLAINED (SEE CAR BULLETIN # 373) | Error codes which are not explained in the service manualsometimes appear on the display when operating the unit in the test mode. | ||
| Sony | CDX5270 | OPTICAL PICKUP RECEIVED FROM NPC DOES NOT WORK IN UNIT | The unit came in for service with type KSS-410A opticalpickup, which was defective. The type shown in the service manual isKSS-313A, which was ordered from NPC and installed in the unit, but thispickup did not work in the customer's unit. Is there a pa | ||
| Sony | CDX5270 | EXTENSION CABLE FOR REPAIRING DISPLAY MCB (J-2502-009-8) | It may be difficult to repair the display MCB without using anextension cable. | ||
| Sony | CDX5270 | NO TUNER AUDIO OR SEEK (FOUND IC503 DEFECTIVE) | No tuner audio - tuner wouldn't seek, would only increment.STEREO always displayed. CD functions and audio ok. | ||
| Sony | CDX5270 | DISCS DON'T LOAD, RE-ENGAGE ST LEVER WITH LEVER IN TOP COVER | The unit will not load discs. Found that the ST Lever (ref.136) had become dis-engaged from the slot in the metal lever which is partof the mechanism top cover. | ||
| Sony | CDX5270 | PART NUMBER ADDITION: FE601 (ORDER P/N A-3282-000-A) | The service manual does not list a part number for the tunerFE601. | ||
| Sony | CDX5270 | EXTENSION CABLES AVAILABLE (ORDER P/N J-2502-011-1) | Do we intend to provide a cable to connect the board and themech. for service purposes? -HQ COMMENTS: The cables are available under P/N J-2502-011-1. See CarStereo bulletin # 325 for details. |