Dicas Reparação
Modelo - Chassis CDPC910
Pesquisa: CDPC910 Enviar Dica Resolvida
Resultados 9
Pedir dica reparação
| Marca | Modelo (Chassis) | Sintoma | Causa | Solução | Por: |
|---|---|---|---|---|---|
| Sony | CDPC910 | NO OPTIC FUNCTIONS - REPLACED FLEX CABLE REF# 54 | Disc would load properly but, no optic movement to home pos. | ||
| Sony | CDPC910 | WON'T UNLOAD DISKS 1 OR 10 - REPLACED WORN SWITCHS S2 AND S3 | Would not return the 10th or 1st disk to the magazine. allother disk slots worked ok. Found switch 183 and 184 to be worn and notbeing closed all the way when elevator was all the way up on down. | ||
| Sony | CDPC910 | BENT CHASSIS PROHIBITS RELIABLE REPAIR | On several units we have had the bottom of the MD section withmajor bends. We have tried to straighten these with little success. Itwould take a rebuild to replace the chassis parts. Are there any options? -HQ COMMENTS: The problem with the sample we | ||
| Sony | CDPC910 | DISPLAY BLINKING ON AND OFF - Q401 SHORTED | Would not read disc initially then lock-up and started pulsingon and off. | ||
| Sony | CDPC910 | DISCS STARTED JAMMIMG AFTER NEW DISCS ARE USED IN MAGAZINE | Dillards Dept. Stores has 125 of this model playing in storebackground music over 15 hrs a day. All 125 stores changed their disksets to Christmas music. After that they all started having intermittentplayer shut down. | ||
| Sony | CDPC910 | NO FOCUS SEARCH (REPAIR TRACE BETWEEN IC102-27 & CN102-9) | No focus operation of optic assembly. Checked focus andtracking and they checked out good. Had the proper voltages on pins 28and 27 of IC102, although the F+ voltage was missing at CN102 pin 9. | ||
| Sony | CDPC910 | M602 RUNS CONTINUOUSLY/MAGAZINE JAMS (RESOLDER CNP604) | Magazine jams and M602 runs continuously (same symptoms as FPRO1314). | ||
| Sony | CDPC910 | MAGAZINE JAMS AND MOTOR M-602 RUNS CONTINUOUSLY | The XA10B magazine jams when it is inserted into the unit andM-602 (Load/Save motor) runs continuously. | ||
| Sony | CDPC910 | MAGAZINE DOES NOT EJECT | As the magazine is being ejected, its lower left corner hitsthe lower left corner of the opening in the front panel. |