Dicas Reparação
Modelo - Chassis CDPC705
Pesquisa: CDPC705 Enviar Dica Resolvida
Resultados 6
Pedir dica reparação
| Marca | Modelo (Chassis) | Sintoma | Causa | Solução | Por: |
|---|---|---|---|---|---|
| Sony | CDPC705 | INTERMITTANT SHUFFLE - RE-GREASED DISC TRAY WASHER | Shuffle function will forget disc (the disc willintermmitantly not align properly with BU bracket and display will read nodisc) | ||
| Sony | CDPC705 | DISK TRAY BASE WARPED | NRC had sent a CDP-C705 to the Technical Dept. The unit had aproblem with the chucking assy. aligning with the spindle motor assembly.We found the problem to be a warped disk table assy., Ref. No. 69 in theS/M.To Tokyo: I am sending one (1) sample of th | ||
| Sony | CDPC705 | SKIPS | Unit skips, even after optic has been changed, this modelseems to be very susceptible to shock, much more so then lesser qualityunits. -HQ COMMENTS: Under normal circumstances the unit should not skip.However, if placed in an area where that is prone to | ||
| Sony | CDPC705 | TORN PRINT ON PCB | When you remove IC-102 with Pyro pen, too much glue has beenput underneath IC. When you try to remove the IC, the print tears up thecircuit board. -HQ COMMENTS: The glue used is necessary during the manufacturingprocess to secure the components to the | ||
| Sony | CDPC705 | TURNTABLE CONTINUALLY ROTATES | The turntable continually rotated. All front panel controlswere inoperative. We found the problem to be a poor connection at IC-302/pin 42. Resoldering resolved the problem. | ||
| Sony | CDPC705 | DISC TABLE WILL NOT ROTATE | On some units the bracket which houses the optical devicecontacts the base of the player. This causes the table not to rotate orthe disc won't play. -HQ COMMENTS: The cause of the problem is the metal base warpingupward, when the bracket drops it does |