Dicas Reparação




Modelo - Chassis CDPC401


Pesquisa: CDPC401 Enviar Dica Resolvida
Resultados 7
Pedir dica reparação
MarcaModelo
(Chassis)
SintomaCausaSoluçãoPor:
SonyCDPC401
NO FOCUS/ERRATIC LENS MOTION (REPLACE C212 P/N 1-123-382-00) When I plugged the unit in the laser starts to focuserratically.
SonyCDPC401
INOPERATIVE (REPLACE D401, P/N 8-719-110-13) The unit was completely inoperative. All power supplies andcrystal frequencies were good. I found voltage on pin 57 IC401 was +5volts instead of -3.8 volts.
SonyCDPC401
WIRE HARNESS IS TOO SHORT Regarding service bulletin HFP0127, part number 1-946-072-21yields an eight-pin harness about four inches long, whereas this unitrequires a harness about twelve inches long. -HQ COMMENTS: Will fax Tokyo. To Tokyo: Should harness be longer? Isthere a l
SonyCDPC401
INCORRECT PIN-OUT FOR IC-303 IN 1990 SEMICONDUCTOR BOOK The 1990 Semiconductor Replacement book shows that IC-303CXD2550P part number 8-752-328-72 subs to CXD2551P part number8-752-334-06. The substitute is a good one. The book does, however, showthat the pin out for the CXD2550 is for a 20 pin in line pack
SonyCDPC401
PART NUMBER FOR REMOTE RM-D505 The CDP-C400 and C401 is supplied without a remote control.Since this unit has a remote control receiver on the front panel, whichcommander should be sold to the customer if they want one? -HQ COMMENTS: Please sell the customer the remote commander RM-
SonyCDPC401
TRANSIT KEY Need part number for new style transit key. -HQ COMMENTS: The part number for the transit key is 4-930-510-01.
SonyCDPC401
OPTICAL ASSEMBLY BRACKET Page 20 of the service manual (see the unidentified bracket)surrounded by reference numbers 107, 106 and 120. Service bulletin No. 31indicates the part number is 4-924-445-01. An ASC received the part andclaims the tabs on the right side of the drawing


Assistência TécnicaAs dicas apresentadas destinam-se a técnicos de eletrónica, a tentativa de reparação ou assistência sem ter conhecimentos de eletricidade e eletrónica, podem provocar danos mais graves aos equipamentos e, devido a tensões muito elevadas em alguns circuitos, graves danos fisicos que podem constituir um risco em determinadas reparações.

Não arrisque reparar equipamentos com tensões elevadas se não tiver conhecimentos técnicos para o fazer em segurança.

Verifique se o esquema está disponível na área de downloads