Dicas Reparação
Modelo - Chassis CDPC400
Pesquisa: CDPC400 Enviar Dica Resolvida
Resultados 10
Pedir dica reparação
| Marca | Modelo (Chassis) | Sintoma | Causa | Solução | Por: |
|---|---|---|---|---|---|
| Sony | CDPC400 | DISC TRAY WON'T OPERATE - RESOLDERED TABLE MOTOR | No tray operation. Disc tray would not spin either way. | ||
| Sony | CDPC400 | NO FOCUS/ERRATIC LENS MOTION (REPLACE C212 P/N 1-123-382-00) | When I plugged the unit in the laser starts to focuserratically. | ||
| Sony | CDPC400 | INOPERATIVE (REPLACE D401, P/N 8-719-110-13) | The unit was completely inoperative. All power supplies andcrystal frequencies were good. I found voltage on pin 57 IC401 was +5volts instead of -3.8 volts. | ||
| Sony | CDPC400 | WIRE HARNESS IS TOO SHORT | Regarding service bulletin HFP0127, part number 1-946-072-21yields an eight-pin harness about four inches long, whereas this unitrequires a harness about twelve inches long. -HQ COMMENTS: Will fax Tokyo. To Tokyo: Should harness be longer? Isthere a l | ||
| Sony | CDPC400 | NO DISPLAY AND SLOW CAROUSEL MOVEMENT | Unit had no display and slow carousel movement. | ||
| Sony | CDPC400 | NO DISPLAY | No display. | ||
| Sony | CDPC400 | PART NUMBER FOR REMOTE RM-D505 | The CDP-C400 and C401 is supplied without a remote control.Since this unit has a remote control receiver on the front panel, whichcommander should be sold to the customer if they want one? -HQ COMMENTS: Please sell the customer the remote commander RM- | ||
| Sony | CDPC400 | TRANSIT KEY | Need part number for new style transit key. -HQ COMMENTS: The part number for the transit key is 4-930-510-01. | ||
| Sony | CDPC400 | INCORRECT PART NUMBER | The part number in the service manual on page 20 shows thestep screw with the part number 7-685-666-79. This part number comes upas a standard thread black screw. The correct part number is needed. -HQ COMMENTS: Tokyo has supplied the correct part num | ||
| Sony | CDPC400 | OPTICAL ASSEMBLY BRACKET | Page 20 of the service manual (see the unidentified bracket)surrounded by reference numbers 107, 106 and 120. Service bulletin No. 31indicates the part number is 4-924-445-01. An ASC received the part andclaims the tabs on the right side of the drawing |