Dicas Reparação
Modelo - Chassis CDPC35
Pesquisa: CDPC35 Enviar Dica Resolvida
Resultados 6
Pedir dica reparação
| Marca | Modelo (Chassis) | Sintoma | Causa | Solução | Por: |
|---|---|---|---|---|---|
| Sony | CDPC35 | PART NUMBER FOR BRACKET (PRESS PULLEY) SAME AS CDP211 | In the service manual there is no reference number and no partnumber for the press pulley bracket. | ||
| Sony | CDPC35 | LEGS OF POWER TRANSFORMER DO NOT MATCH HOLES ON PCB | The power transformers supplied by NPC (p/n 1-449-954-11) havelegs which do not line up with the holes on the power PCB. -HQ COMMENTS: Tokyo has advised that the transformer can be adapted tothe power board by trimming the two leads that do not match th | ||
| Sony | CDPC35 | NO DRAWER OPERATION WITH NEW "BD" BOARD | With new BD board drawer would not open. | ||
| Sony | CDPC35 | DAMAGED LOADING GEAR | Unit does not open/close properly, or will close, openslightly and then close again. | ||
| Sony | CDPC35 | INCORRECT PART NUMBER IN PART LIST - Q-604 | Q-604 is listed in the parts list as a DTA144ES part number8-729-900-65. This is erroneous. It is a DTC114ES P/N 8-729-900-80. -HQ COMMENTS: Thanks for the info. | ||
| Sony | CDPC35 | INCORRECT PART NUMBER - SPINDLE MOTOR | Part number for spindle motor (M-101) is incorrectly listed inthe service manual. |