Dicas Reparação
Modelo - Chassis CDPC345
Pesquisa: CDPC345 Enviar Dica Resolvida
Resultados 11
Pedir dica reparação
| Marca | Modelo (Chassis) | Sintoma | Causa | Solução | Por: |
|---|---|---|---|---|---|
| Sony | CDPC345 | WHISTLING NOISE | Re: Vistain's complaint of whistling noise with this unit. | ||
| Sony | CDPC345 | WHISTLING NOISE - ADD RTV BTWN SPINDLE MOTOR & BD BOARD | a whistling noise (about 400HZ) manifists itself on certain cuts of disc (Goodbye Yellow Brick Road, Elton John, Polydor D103076). If you touch the optical block lightly, the noise disappears. | ||
| Sony | CDPC345 | TRAY MOTOR SPINNING BACKWARDS - REPLACE TABLE MOTOR | Ran into this problem 5 times in past 3 weeks. Removed traymotor. Old motor is installed with lable on motor facing up. If newmotor is installed with lable facing up, motor will spin backwards andtray will not function properly. | ||
| Sony | CDPC345 | CD DRAWER TAKES MINUTES TO OPEN - REPLACED IC451 | Drawer took several minutes to open. Found drawer would spinendlessly. | ||
| Sony | CDPC345 | PLAYS ONLY 10 SECONDS OF ANY DISK - RESOLDERED SLED MOTOR | Sled motor won't play past 10 seconds. | ||
| Sony | CDPC345 | CLICKING & KNOCKING WHEN CHANGING CD'S - REPL BRACKET ASSY | As the cam gear turns and brings the bu bracket up a knock isheard. This knock causes the CD not to be chucked properly it will loadthe CD off center and jam up. The knock or clicking also causes the buholder to bounce into position. | ||
| Sony | CDPC345 | TIMING APPEARS TO BE A PROBLEM - RESOLDERED MAIN BOARD | The unit acts very erratic, i.e. the drawer opens fast orslow, timing seems off, but when done by hand (unpowered) timing is ok. | ||
| Sony | CDPC345 | HOWLING MECHANICAL NOISE COMING FROM INSIDE UNIT - HFP#381 | Loud howling noise heard from inside unit. but only oncertain cd's and only on some tracks of those cd's. If you press lightlyon spindle motor while it is turning the noise will increase. | ||
| Sony | CDPC345 | BU MECH POPPING OUT OF CAM GEAR IN THE UP POSITION | BU mech came out of cam gear in the up position causing thedoor not to open and unit to jam up. | ||
| Sony | CDPC345 | NO PART # FOR FRONT FOOT - P/N IS X49445291 | There is no part number for the front foot of the CDPC345.Part X49435101 is (CDPC235) the front panel assy which appears to comewith the front foot. If we order X49435101 we get the front panel for theCDPC235. There is not part # for the front panel of | ||
| Sony | CDPC345 | INCOMPLETE TURNTABLE MOVEMENT - SHAFT OF GEAR, REF#66, BENT | After replacing IC401, R457, R458, R459 per SVC Bulletin, CSA13, the disc turntable still moved irregularly, demonstratedjerking movement. |