Dicas Reparação




Modelo - Chassis CDPC26


Pesquisa: CDPC26 Enviar Dica Resolvida
Resultados 11
Pedir dica reparação
MarcaModelo
(Chassis)
SintomaCausaSoluçãoPor:
SonyCDPC265
DISTORTED AUDIO - REPLACED IC501 ON MAIN BOARD After a few minutes the aduio would be distorted on both channels.
SonyCDPC265
WHISTLING NOISE - ADD RTV BTWN SPINDLE MOTOR & BD BOARD A whistling noise (about 400HZ) manifests itself on certaincuts of disc (Goodbye Yellow Brick Road, Elton John, Polydor D103076). Ifyou touch the optical block lightly, the noise disappears.
SonyCDPC265
JAMMED DRAWER - REPLACED MISSING SCREW AND BROKEN LOCK LEVER Unit came in with drawer jammed found bu assembly loose inunit and lock lever broken. Found screw that holds the bu down was neverput in the unit.
SonyCDPC265
NO PLAY - STAPLE STUCK TO CHUCKING MAGNET Unit would not play due to staple being stuck to chuckingmagnet. This was an out of box failure.
SonyCDPC265
WILL NOT LOAD - REALIGNED U/D GEAR Unit would not load disc due to u/d gear beingjammed/misaligned.
SonyCDPC265
SKIPS ON OUTER TRACKS - REPLACED OPTICAL BLOCK Unit would skip particularly on outer tracks. Not possibleto adjust focus bias correctly.
SonyCDPC265
PART NUMBER CHANGE FOR IC401 - NEW P/N 875286488 The part number listed in the service manual 8-752-861-78for IC401 is incorrect.
SonyCDPC265
WILL NOT READ DISC PAST 30 SECONDS - TRACE TO M101 BROKEN disc player will only play for 30 seconds then unit won'tread disc anymore.
SonyCDPC26
WILL NOT READ DISC Does not play disc.
SonyCDPC26
BROKEN PULLEY CHUCKING I have found the Pulley Chucking broken in several units. Ihave replaced the Pulley Chucking and on a few units they have come backin a few weeks with the same problem. I found by melting and spreadingout center of the Pulley Chucking so it overlaps th
SonyCDPC26
INCORRECT PART NUMBER The part number in the service manual on page 19 shows thestep screw with the part number 7-685-666-79. This part number comes upas a standard thread black screw. The correct part number is needed. -HQ COMMENTS: Tokyo has supplied the correct part num


Assistência TécnicaAs dicas apresentadas destinam-se a técnicos de eletrónica, a tentativa de reparação ou assistência sem ter conhecimentos de eletricidade e eletrónica, podem provocar danos mais graves aos equipamentos e, devido a tensões muito elevadas em alguns circuitos, graves danos fisicos que podem constituir um risco em determinadas reparações.

Não arrisque reparar equipamentos com tensões elevadas se não tiver conhecimentos técnicos para o fazer em segurança.

Verifique se o esquema está disponível na área de downloads