Dicas Reparação




Modelo - Chassis CDP55


Pesquisa: CDP55 Enviar Dica Resolvida
Resultados 8
Pedir dica reparação
MarcaModelo
(Chassis)
SintomaCausaSoluçãoPor:
SonyCDP55
DOOR OPENS BY ITSELF After the first repair in which the belt was replaced, thecustomer complained of the same problem. 1. After opening the tray totake out a disc, the tray will close by itself before another disc can beput into the tray. 2. Tray opens by itself.
SonyCDP550
DRAWER NOT CLOSING After opening, disc drawer would not close (either by open/close button or by pushing drawer in. If drawer was pushed in and o/cbutton pressed, drawer would open. If o/c button pressed again quick,drawer would close but unit would not spin disc. Drawe
SonyCDP55
UNIT SKIPS Transformer buzzing and unit skips.
SonyCDP55
ERRATIC OPERATION Erratic operation.
SonyCDP55
MUSIC SKIPS Music skips randomly.
SonyCDP55
OCCASIONALLY SKIP AT THE END OF DISC The unit would occasionally skip toward the end of the disc.When this occurred we noticed that the sled motor chattering. This wasdue to poor gear mesh between the worm and first gear.
SonyCDP55
UNIT GOUGES DISC IN CIRCULAR PATTERN Second unit with this problem. At first one might suspect afocus problem optical coming up too far. This is being caused by liftpins in the disc table not coming down far enough to clear disc.
SonyCDP55
CENTERING CAP BREAKING The centering cap and compression spring in the middle of discturntable fall out of place. The symptom is either the disc tray will notmove or the disc will not spin. The problem is the plastic legs that aresupposed to provide spring tension to hold th


Assistência TécnicaAs dicas apresentadas destinam-se a técnicos de eletrónica, a tentativa de reparação ou assistência sem ter conhecimentos de eletricidade e eletrónica, podem provocar danos mais graves aos equipamentos e, devido a tensões muito elevadas em alguns circuitos, graves danos fisicos que podem constituir um risco em determinadas reparações.

Não arrisque reparar equipamentos com tensões elevadas se não tiver conhecimentos técnicos para o fazer em segurança.

Verifique se o esquema está disponível na área de downloads