Dicas Reparação
Modelo - Chassis CDP27
Pesquisa: CDP27 Enviar Dica Resolvida
Resultados 6
Pedir dica reparação
| Marca | Modelo (Chassis) | Sintoma | Causa | Solução | Por: |
|---|---|---|---|---|---|
| Sony | CDP2700 | STATIC IN AUDIO D/A CONV NOT SWITCHING ON - REPL IC901 | Static in audio all the time, no music, no B+ going to theD/A converters which are IC401 and IC501 | ||
| Sony | CDP270 | NO OPERATION, NO DISPLAY - REPLACED IC12 | The unit was not completely dead, but had no display or buttonoperation. | ||
| Sony | CDP27 | RF PLL ADJUSTMENT PROCEDURE STEPS 1 AND 2 ARE INCORRECT | RF PLL adjustment procedure steps 1 and 2 are incorrectlystated. | ||
| Sony | CDP270 | DRAWER WILL INTERMITTENTLY NOT CLOSE COMPLETELY | Intermittent operation of drawer. Unit will function properly20-30 times in a row and then will not fully load. Drawer will close butloading motor will continue to run and will eventually reopen. Multipleattempts to realign have proven futile. Please | ||
| Sony | CDP270 | D.O.A. - WILL NOT SPIN DISC | FOK, SENS, MON, MDS, MDP are all normal. No action at IC-3/pin 45 SPDLO. Pull up IC-5/ pin 2 to 5V through 1K resistor causesspindle motor to turn. | ||
| Sony | CDP27 | DISC WON'T SPIN PROPERLY | There is space between arm assy and motor spindle. |