Dicas Reparação
Modelo - Chassis CCDV9
Pesquisa: CCDV9 Enviar Dica Resolvida
Resultados 60
Pedir dica reparação
| Marca | Modelo (Chassis) | Sintoma | Causa | Solução | Por: |
|---|---|---|---|---|---|
| Sony | CCDV9 | LED WINDOW ON VIEWFINDER UPPER CABINET | We have a problem with the above part in stock in KC. Whenordered, the part does not include the small red LED window as shown inthe diagram, and there seems to be no seperate part number for the window.Can you please investigate and advise? -HQ COMMEN | ||
| Sony | CCDV9 | CHARACTERS ARE DISPLAYED E TO E MODE | Characters that are normal displayed on the EVF are also dis-played on the monitor. Refered to CCD-V9 troubleshooting guide for titlecircuit description. Traced problem to IC-001, no output (CG wind) on pin32. Input Ref. signal (V REF.) at 2.5 volts P | ||
| Sony | CCDV9 | NEW TRACK SHIFT JIG SUBS TO THE OLD PART NUMBER | A servicer tried to order the new track shift jig and itsubstitutes to the old part number (J6080843A). How can I get the newtrack shift jig? -HQ COMMENTS: I checked both of the part numbers and they are bothgood in KCP. | ||
| Sony | CCDV99 | DARK PICTURE | The camera E-E picture is dark. The camera RECORD andPLAYBACK picture is dark. | ||
| Sony | CCDV99 | NO VIDEO PLAYBACK OF HI-8 METAL E TAPES | No video in playback mode with use of Hi-8 metal E tapes.Only a gray screen with audio. | ||
| Sony | CCDV9 | NO RECORD - POOR SOLDER | No record. Poor solder at Q-342. | ||
| Sony | CCDV9 | DEAD UNIT | Unit dead and no display. When lithium battery is taken out,display comes on. When its put back in, the unit dies again. | ||
| Sony | CCDV99 | NO PICTURE ON PAUSE | When camera is in playback, put in pause, video will be lost(bad A head). Following the video path, found pin 20 HD-8 board hadone field missing when put in pause. Following it back, found that inpause, video switch between pin 5 and 3 IC-202 on the H | ||
| Sony | CCDV99 | VERTICAL LINES IN PICTURE | Vertical, winding lines in picture, unstable raster. | ||
| Sony | CCDV99 | PART NUMBERS FOR FLEX CONNECTORS | I need the part numbers for the following flex connectors:FP160, FP162, FP203. | ||
| Sony | CCDV9 | COLOR DISTORTED AND FLASHING | Color distorted in Play, ok in Pause. Sometimes colordistorted in Pause, ok in Play. | ||
| Sony | CCDV99 | POOR AUDIO RECORD WITH LOUD POPS | Records audio poorly with loud pops during camera recordings | ||
| Sony | CCDV9 | SHUTDOWN DEW INDICATION AND EJECT MODE ACTIVATION | Unit stayed on eject position and DEW indication at all times.As soon as power was turned on, found the contact pins in connector CN-001of flexible ribbon FP-57 having poor pressure (preventing good contactwith terminals at CC7 mechanism board). | ||
| Sony | CCDV9 | UNIT DEAD FUSE BLOWN | Unit would intermittently blow fuse F-902. | ||
| Sony | CCDV9 | INCOMPLETE LOADING OF TAPE | Unit would load approximately half way, then stop. If lightpressure was applied to top lid, loading would continue, but stop againwhen mechanism was a little lower. Eject worked fine. When using modeselector box, unit loaded and unloaded properly, eve |