Marca | Modelo (Chassis) | Sintoma | Causa | Solução | Por: |
---|---|---|---|---|---|
Sony | CCDV5000 | CHANGE OF VIEWFINDER TYPE | Regarding the above CRT for the CCDV5000 viewfinder, has thisCRT been changed from a square type to a round type? A servicer says heopened a viewfinder to replace the CRT and noticed it had a round typeinstead of the square type. Has it been changed? | ||
Sony | CCDV5000 | IMPROPER IRIS OPERATION WHEN IN MANUAL MODE | When switched to manual mode, iris would close completelyunder lower light conditions. | ||
Sony | CCDV50 | NO DISPLAY OF DATE/TIME ON VIEWFINDER | No display of date/time on viewfinder. Connected monitor tothe viewfinder connector (CN-951). Date and time was displayed. | ||
Sony | CCDV5000 | INCORRECT PART NUMBER FOR AF-DM ASS'Y | The part number listed in the manual for the AF-DM ass'y isA-7030-171-A. This part number is no good in KCP or RPC. | ||
Sony | CCDV5000 | NO AUDIO FOR 1 1/2 SECONDS AFTER PAUSE | When customer takes unit out of pause mode, he has no audiofor 1 1/2 seconds. This causes a problem when editing. -HQ COMMENTS: This is normal operation. The audio must be muted untilthe servos come up to speed, otherwise there would be noise from the | ||
Sony | CCDV5000 | WHEN USING DIGITAL FUNCTIONS OVERLAP NOT SMOOTH | When in Standby mode, picture will jump when going fromdigital functions to clear. When using the overlap function, afteroverlap is completed, picture will jitter slightly. Checked adjustmentsto digital board and found them in specs. Jitter of picture | ||
Sony | CCDV5000 | OUTDOOR TOO RED AUTO SLIGHTLY OFF RED | After performing white balance adjustments, found outdoorpreset to be slightly red. Is there a way to compensate for this withoutaffecting the manual white balance setting? -HQ COMMENTS: The white balance adjustment should work OK. Please tryre-perfor | ||
Sony | CCDV5 | REPLACING LENS FOR CCD-V5 | It takes too long to replace lens for the CCD-V5. | ||
Sony | CCDV5000 | COLOR FLICKERS 30 SECONDS INTO PLAYBACK | Color starts flickering after about 30 seconds of playback. | ||
Sony | CCDV5000 | NOT SHOWING WHEN BATTERY IS LOW | I supplied an externally regulated DC power supply with unitin Record, Standby, I lowered the DC supply from 6.3V down to 5.5V. Thebattery down indicator did not come on at all on the LCD or monitor. | ||
Sony | CCDV5000 | VERTICAL LINES IN PICTURE | Vertical, winding lines in picture, unstable raster. | ||
Sony | CCDV5 | NOISE WHILE EJECTING TAPE | Clicking noise when tape is being ejected or intermittentlystops while in play or record mode. | ||
Sony | CCDV5000 | IN PCM MODE NO RIGHT CHANNEL | No right channel in PCM mode. | ||
Sony | CCDV5000 | NO EJECT/TAPE JAM | Tape jam and no eject. | ||
Sony | CCDV5000 | PART NUMBER FOR CONNECTOR CN604 - CN301 | We need the part number for the following connector. -TO TOKYO: Can you give us the part number for the board connectorthat goes between the DI-21 board CN-604 and the VC-55 board CN-301?It is a four-pin 1.5mm pitch. Thank you in advance. -HQ COMMENTS |