Dicas Reparação




Modelo - Chassis CCDV11


Pesquisa: CCDV11 Enviar Dica Resolvida
Resultados 92
Pedir dica reparação
MarcaModelo
(Chassis)
SintomaCausaSoluçãoPor:
SonyCCDV110
DEAD No power.
SonyCCDV110
DEAD Unit dead.
SonyCCDV110
NO PIX VIEWFINDER PB No pix in viewfinder.
SonyCCDV110
INTERMITTENT TIME/DATE DISPLAY Display only two dots on TIME/DATE DISPLAY.
SonyCCDV110
NO RF OUTPUT No RF out of RFU80 connector to TV. Video and audio outputare functioning. No B+ to RF connector present.
SonyCCDV110
DEAD SET Unit came in dead. Replace F381 connect all cables andharnesses. Unit comes on but no camera video. Playback deck works fine.
SonyCCDV110
TITLE AND SUBTITLE DON Title and subtitle work but will not hold in memory.
SonyCCDV110
DOA Unit came in DOA.
SonyCCDV110
BENT PIN ON MULTICONNECTOR Bent pins.
SonyCCDV110
NO LUMINANCE After warm up period lost luminance.
SonyCCDV110
NO CAMERA POWER Unit came in no camera power. Found F901 blown DC-DCconverter (DR901) OK. Found CN003 DR901 (should go to EM-1 boardconnector 901) going to AU-24 board CN403. Both connectors are 2 pinred and gray wires and apparently were switched in manufacturing.
SonyCCDV110
POWER UP ONLY Power up but no transport functions due to no drum rotation.
SonyCCDV110
ZOOM NOT WORKING CORRECTLY Zoom switch ran one direction only towards wide not telephoto.Found B+ wired to one side of switch and not center.
SonyCCDV110
PLAYBACK NO Y INFO AND CAMERA NO ZOOM, NO VIDEO 1) Traced Y info around VTR back to Pin 2 of VY-8 board buthad no out at Pin 21, traced to no info at Pin 37 of IC0001 on VY-8 buthad info on C049 coupling cap. IC side of cap was soldered but not toland PC. 2) Developed after repair of first problem.
SonyCCDV110
IC IC801, 802, 803 on AF-23 board have no P/Ns in S/M. -HQ COMMENTS: Please refer to the CCD-V5 service manual, AF board, forthe IC part numbers.


Assistência TécnicaAs dicas apresentadas destinam-se a técnicos de eletrónica, a tentativa de reparação ou assistência sem ter conhecimentos de eletricidade e eletrónica, podem provocar danos mais graves aos equipamentos e, devido a tensões muito elevadas em alguns circuitos, graves danos fisicos que podem constituir um risco em determinadas reparações.

Não arrisque reparar equipamentos com tensões elevadas se não tiver conhecimentos técnicos para o fazer em segurança.

Verifique se o esquema está disponível na área de downloads