Marca | Modelo (Chassis) | Sintoma | Causa | Solução | Por: |
---|---|---|---|---|---|
Sony | CCDTR77 | ZEROS IN EVF AND ALL SEGMENTS LIT IN LCD - W501 PIN 14/CN74 | The EVF only showed zeros and all segments and characters onthe LCD were turned on. There was no data to slave signal between LC45and VS103 boards.-SOLUTIOIN :Resoldered pin 14 of W501 on CN74 board. Submitted by DewayneKemp of Entertainment Technolog | ||
Sony | CCDTR77 | NO CAMERA OUTPUT/RESOLDER L710 | The camera had no output. The problem was caused by L710 onthe VC136 board being poorly soldered on one side. Re-soldering resolvedthe problem.L 710 is in the camera 5v line. When it opens the camera sections isbasically dead. | ||
Sony | CCDTR77 | DEAD NO LCD/REPLACE FLEX CABLE W501 | Camera was dead and no LCD. W501 30P flexible cable betweenLC45 and CN74 boards. Was intermittent when flexed. | ||
Sony | CCDTR77 | GRIP BELT BROKE OUT OF CABINET/REPLACE BELT GRIP 373680701 | Technician found the grip belt broken out from the cabinet.He does not feel it broke due to customers abuse. Tech feels it is amanufacturing defect. | ||
Sony | CCDTR77 | AVAILABILTY OF CONNECTOR CN401/USE 1-691-539-11 |