Marca | Modelo (Chassis) | Sintoma | Causa | Solução | Por: |
---|---|---|---|---|---|
Sony | CCDTR714 | DEAD (FOUND BATTERY WAS ONLY INSERTED TO FIRST LATCH POINT) | No Power. Found that the problem was caused by the batterynot being fully secured to the camera. This year's models have a newlocking mechanism which actually has 2 points at which the user will feela latched-in condition. The contacts of the battery | ||
Sony | CCDTR71 | DEAD / LIT BAT RESET | Unit came in dead, has display no batt indicator, nofunctions. -SOLUTION :Removed lith batt ran unit then reinstalled lith batt. Letsit overnight, still worked next am. have seen this in 2 other CCDTR71,is there amod like in the FX series for lockup | ||
Sony | CCDTR71 | INTERMITTENT PLAYBACK VIDEO - C303/VS-93 BD | Unit came in with e-e ok but there was no playback video signal.I followed video up through Ic151. At Ic151 pin#7 signal was good but atpin#3 signal was lost. I then followed signal through some transistors upto Q166 and the signal was still good | ||
Sony | CCDTR71 | ROLLING BLACK DATA SCREEN IN VIEWFINDER L852/VC112 BD | In camera mode there would be a rolling black datascreen in the viewfinder and no video out. No sync burst or video. | ||
Sony | CCDTR71 | ONLY ZOOMS ONE WAY/REPLACE IC855 | Unit would only zoom in the direction that zoom was firsttried at power-on. If you tried wide first, it would only zoom wide untilyou turned power off. After killing power if you tried tele first, wouldonly zoom in the telephoto. | ||
Sony | CCDTR71 | BROKEN VIEW FINDER LATCH | View finder latch breaks off and you must replace (or at leastorder) the entire right cabnet to fix it. Can the latch be made aseperate part number? -HQ COMMENTS: We investigated this before, and found it to be tooexpensive to get a sufficient quantity | ||
Sony | CCDTR71 | MODE SWITCH | Mode switch bad, mode switch is not available separately. Theone way to repair is to replace entire chassis , #301.Can you locate a part for mode switch separately. TR5 has part # but Idon't know if it is the same. -HQ COMMENTS: Because of the high pr | ||
Sony | CCDTR71 | MISSING PART # FOR CAPSTAN CONNECTOR | Part # for capstan connector missing from SM. cn502 isnot part of FP-182 (W403) 1-630-591-11. | ||
Sony | CCDTR71 | DEFECTIVE SWITCH BLOCK | This camera would not stay on if the hi fi sound switch was onthe 1 position. The VTR section would shut off if the hi fi switch wasin the 2 position. Everything was fine if it was in the hi fi position. | ||
Sony | CCDTR71 | NO POWER/REPLACE C391 | No power, has blown fuse. | ||
Sony | CCDTR71 | NO VIDEO "IN" IN VTR MODE/REPLACE IC153 | No video in - in VTR mode. No image on EVF except forcounter digits which oscillate vertically at a regualr interval of fewseconds. | ||
Sony | CCDTR71 | NO ZOOM, STUCK IN MANUAL FOCUS ALL THE TIME NO MANUAL EXPOSU | Zoom did not work, auto focus did not work(stuck in manualfocus). No manual operation of exposure and program. | ||
Sony | CCDTR71 | NO SYNC ON CAMERA VIDEO/REPLACE L852, VC112 | Camera video was not synced. Video in was OK. Found L852broken off board. | ||
Sony | CCDTR71 | DROPOUTS ON VTR PLAYBACK/REPLACE C289, VS93 BOARD | The unit had not delayed video coming out of 1H delay, IC154,Pin 4. The video input on Pin 1 was good. DC voltages on Pins 12, 13,and 15 were all off. | ||
Sony | CCDTR71 | NO VIDEO ON E TO E / REPLACE IC802, VC112 BOARD | All digital outputs from A/D converter IC802 were at 3.5 volts(even unloaded), instead of between 1V ad 9V. |