Dicas Reparação
Modelo - Chassis CCDTR700
Pesquisa: CCDTR700 Enviar Dica Resolvida
Resultados 10
Pedir dica reparação
| Marca | Modelo (Chassis) | Sintoma | Causa | Solução | Por: |
|---|---|---|---|---|---|
| Sony | CCDTR700 | AWB ADJUSTMENT PROBLEM; NO DDS DISPLAY; INPUT DATA D:21:21 | There is a step missing from the AWB adjustment procedurewhich puts the DDS display on the screen. | ||
| Sony | CCDTR700 | COLORS ARE CHANGING / ZERO OUT DATA, PAGE "F" ADD 6B; WAS F1 | After comparing data with a working unit, found address 6B ofpage F to be F1 (AWB all tracking mode), changed data to 00 to restorethe normal mode of AWB operations. | ||
| Sony | CCDTR700 | DIST/LOW AUDIO ON LEFT CHANNEL / REPL D519 ON THE JK-108 BD | Unit had very low and distorted audio on the left channel. | ||
| Sony | CCDTR700 | DEAD / REPLACE F450 & F452 | Unit not powering on VTR/Camera. Found F450, F452 badcaused by drop of unit. Unit also has bend in cassette holder and brokenpart caused by impact of drop. | ||
| Sony | CCDTR700 | CASSETTE HOLDER NOT CLOSING / REPLACE SLIDER (T) ASSY | Cassette holder is not closed and that's why the unit cannotaccept tape. Found Plate assy side broken caused by a drip. -SOLUTION :Replace (T) assy side. | ||
| Sony | CCDTR700 | INT. LOADING AND FUNCTIONS / RESOLDER IC 501 ON VS-99 BD. | Intermittent loading and function. | ||
| Sony | CCDTR700 | WILL NOT PLAY HI-8 RECORDING/ RESOLDER SL-37 BD | Unit would not recognize Hi-8 tapes, therfore any Hi-8 recording appeared washed out. | ||
| Sony | CCDTR700 | INTERMITTENT NO ZOOM AND NO REMOTE CONTROL FUNCTIONS | Remote control would not operate camera and also zoom switchon camera will not work. | ||
| Sony | CCDTR700 | MISSING SEGMENTS IN LCD/REPLACE IC902 | Missing segments in LCD Display. Cuased by IC902/ p. 59 modecontrol cpu being continually low. Pin 59 is part of segment drivecircuit. Replacement of IC902 resolved problem. | ||
| Sony | CCDTR700 | TAPE PRE-END SIGNAL ALWAYS ON/CHECK CN873 | Tape pre-end signal always on. |