Dicas Reparação




Modelo - Chassis CCDTR65


Pesquisa: CCDTR65 Enviar Dica Resolvida
Resultados 7
Pedir dica reparação
MarcaModelo
(Chassis)
SintomaCausaSoluçãoPor:
SonyCCDTR65
NO PB VIDEO (FOUND IC158 ON VS100 MCB BAD) No PB video audio OK. Camera E-E OK.
SonyCCDTR65
DOES NOT RECORD OR PLAYBACK/REPLACE C303 Unit has no video on camera or VCR. SOLUTION: Traced video signal in playback mode to pin 3 of IC151. Nooutput on pin 28. V mute on pin 29 4.7v. Disconnected pin 20 ofIC402. Picture became scrambled. Discovered C303 open.
SonyCCDTR65
NO CHROMA/RESOLDER L721 No chroma camera video playback good. -SOLUTION : Had chroma at core output pin 30, did not have it at pin12 W405. Inspected band pass between the two and found L721 to beslightly lifted from the VC board on one side. Resoldered L721. -HQ COMMENTS: L
SonyCCDTR65
IDENTIFICATION OF LENS There are two part number in theh svc man pg 52, for the lens154754811 VCL6210WC - 154763011 VCL6210WF. How do we identify which lensis in the unit? -HQ COMMENTS: Looking from the front, the type A lens (VCL-6210WC) has aD-shaped iris motor. The B-type
SonyCCDTR65
MODE BOX CONNECTOR J-14 /J-6082-197-A, J-6082-198-A Two types of connectors are used on this camera. It cannot beconnected to the mode box. I need adaptor on new extension board. -HQ COMMENTS: The part number for J-14 on page 166 of the Service Manualis incorrect. Please use part numbers J-6082-197-A a
SonyCCDTR65
SHADED EVF PICTURE WITH MPK-TRA When using the CCD-TR65 with a MPK-TRA, a gap between theeyecup of the EVF of the camera and the rear protector of the marine packmay cause shading on the EVF picture. -HQ COMMENTS: Replace the eyecup of the EVF with the SPK Lens Assy(X-3943-699-1). To
SonyCCDTR65
COLOR VIEWFINDER IN BLACK AND WHITE/REPLACE X801 Viewfinder was in black and white (no color).


Assistência TécnicaAs dicas apresentadas destinam-se a técnicos de eletrónica, a tentativa de reparação ou assistência sem ter conhecimentos de eletricidade e eletrónica, podem provocar danos mais graves aos equipamentos e, devido a tensões muito elevadas em alguns circuitos, graves danos fisicos que podem constituir um risco em determinadas reparações.

Não arrisque reparar equipamentos com tensões elevadas se não tiver conhecimentos técnicos para o fazer em segurança.

Verifique se o esquema está disponível na área de downloads