Marca | Modelo (Chassis) | Sintoma | Causa | Solução | Por: |
---|---|---|---|---|---|
Sony | CCDTR514 | DEAD (FOUND BATTERY WAS ONLY INSERTED TO FIRST LATCH POINT) | No Power. Found that the problem was caused by the batterynot being fully secured to the camera. This year's models have a newlocking mechanism which actually has 2 points at which the user will feela latched-in condition. The contacts of the battery | ||
Sony | CCDTR51 | NO CAMERA "E TO E" VIDEO/RESOLDER CN801 | Iris is open but there is no camera video. | ||
Sony | CCDTR51 | DRUM MOTOR RUNS AWAY F901 OPEN | When power is applied the drum runs at high speed. | ||
Sony | CCDTR51 | NO CAMERA PICTURE AFTER WARM UP | After warm up, camera picture fades out to black with streaksfrom left to right. The VCR Playback is ok. | ||
Sony | CCDTR51 | SHORTED C-154 ON "VS-77" BOARD | Unit is inoperative. | ||
Sony | CCDTR51 | NO CAMERA VIDEO | No camera video. IC-707, pins 86 to 95 appear to have gooddata input. No luminance signal out at pin 51. VDD and clocks measureok. | ||
Sony | CCDTR51 | NO LCD DISPLAY OPERATION | No LCD display operation. Crystals X-241 and X-242 wereoperating correctly. |