Dicas Reparação
Modelo - Chassis CCDTR5
Pesquisa: CCDTR5 Enviar Dica Resolvida
Resultados 146
Pedir dica reparação
| Marca | Modelo (Chassis) | Sintoma | Causa | Solução | Por: |
|---|---|---|---|---|---|
| Sony | CCDTR51 | NO CAMERA "E TO E" VIDEO/RESOLDER CN801 | Iris is open but there is no camera video. | ||
| Sony | CCDTR500 | DROPOUTS/REPLACE RAIL BASE X-3941-929-1 | This unit showed subtle but constant glitches and smalldropouts when playing back recorded material. It also had intermittentnoise (mechanical) during rewind. | ||
| Sony | CCDTR500 | NO COLOR IN E TO E MODE/CHECK CT601, VC137 BOARD | Camera would play and record fine but no color in E to E mode. | ||
| Sony | CCDTR505 | BLOWS FUSE/CHECK SOLDERING ON IC903 | Intermittently will blow 1.6A main fuse. When it went badwould draw 1.5A in camera mode. | ||
| Sony | CCDTR5 | REPLACEMENT PART WON'T MOUNT/SCREW TOO SHORT | Receive sub replacement A7040209K, and the assembly isthicker at the mounting where the fixing boss is attached(S/B cam 171).Making the original screw too short. USE A 1.4 X 3.0(7-627-551-57) SCREWINSTEAD OF THE 1.4 X 2.5 SCREW. -HQ COMMENTS: This has | ||
| Sony | CCDTR5 | P/N FOR EVF LOWER CABINET NOT IN SERVICE MANUAL | The above part isn't in the service manual and I can't find aservice bulletin on this. | ||
| Sony | CCDTR500 | UNIT DEAD WITH BATTERY/Q953, VF-53 BOARD SHORTED | Unit would not power up with battery. Unit worked OK with ACadaptor. | ||
| Sony | CCDTR500 | NO POWER IN CAM MODE/CHECK SOLDERING ON CN306 | No intermittent power in camera mode. | ||
| Sony | CCDTR500 | UNIT WILL NOT WORK WITH BATTERY/REPLACE Q-953 | Unit would not power up with battery. Unit worked fine on ACadaptor. | ||
| Sony | CCDTR500 | CAUTION INDICATION/REPLACED LOADING MOTOR | Wouldn't load tape and caution indication present. Foundloose item 172 base assy causing mechanism jam. Also, found a bad loadingmotor damaged by the mechanism malfunction. | ||
| Sony | CCDTR500 | WRONG PART NUMBER FOR EZ CLIP TOOL/USE J-6082-244-A | The part number for the EZ Clip Jig in the service manual isincorrect. It is listed as J-6082-224-A. | ||
| Sony | CCDTR55E | WASHED OUT PICTURE IN CAMERA MODE/CHECK C-304 VC60 | Unit came in with stuck iris. After restoring iris function,the unit displayed washed out picture with poor chroma and poor contrast.Found C304 missing. The board looked like it was never soldered or a verypoor soldering job. | ||
| Sony | CCDTR51 | DRUM MOTOR RUNS AWAY F901 OPEN | When power is applied the drum runs at high speed. | ||
| Sony | CCDTR5 | MISSING PART NUMBER IN SERVICE MANUAL, HALL ELEMENT/FP115 BD | This part was not included in the service manual. -HQ COMMENTS: The part number for the hall element is the same as allother FL mechanism units (1-808-448-11) | ||
| Sony | CCDTR5 | NO PB VIDEO, AUDIO OK/C236 VS22 BD | There was no playback in video, but audio is good. |