Dicas Reparação
Modelo - Chassis CCDTR4
Pesquisa: CCDTR4 Enviar Dica Resolvida
Resultados 76
Pedir dica reparação
| Marca | Modelo (Chassis) | Sintoma | Causa | Solução | Por: |
|---|---|---|---|---|---|
| Sony | CCDTR4 | CAMERA HAS NO VIDEO OUT, EVF OK (FOUND OPEN IC201-8 TO C207) | Unit has video in EVF but no video out of pin 8 of IC201. | ||
| Sony | CCDTR400 | DRUM SPINS FAST (FOUND X502 BAD) | Drum spins fast. | ||
| Sony | CCDTR400 | BATTERY END ADJUSTMENT DATA ADDRESS IS INCORRECT IN S/M | When setting up to read data for battery end adjustment,value at address 47 does not change per procedure on page 7-62 of servicemanual. | ||
| Sony | CCDTR400 | NO COLOR ON RECORD OR PLAYBACK / REPLACE X201 | Camera had no color through the monitor, but pix in EVF wasOK. Discovered frequency of VXO 40 Hz lower. | ||
| Sony | CCDTR400 | SQUEAL USING MAXELL TAPE / | Had a few reports of the CCDTR400 producing a squeal,sometimes intermittently, from drum are which is actually caused by thetape. The offending tape is a Mexell Hi8 XR metal 100. Using any otheretape eliminates the noise. Suspect tape develops a bi | ||
| Sony | CCDTR400 | INT B/W IN PLAYBACK / REPL IC201 (Y/C PROCESS) VS BOARD | Pix in playback has weak color and goes to b/w, then back toweak color. | ||
| Sony | CCDTR4 | INTERMITTENT B/W PIX IN VIDEO OUTPUT/RAN JUMPER; LEAKY C216 | Unit has multiple problems after reair, found C326 leakingwhich is eating trace from possitive side of C326 to R216 of chroma ampcircuit. | ||
| Sony | CCDTR400 | INDIVIDUAL MOTOR TESTING USING RM-95 | Models such as the CCDTR400 and CCDFX430 do not include themotor test on one of the service procedures, ex, capstan forward andreverse drum forward and reverse etc. | ||
| Sony | CCDTR400 | UNIT PLAYS WITH NO TAPE INSIDE / RPL PS500 | Unit goes into play with no tape inside also does not sensereel rotation. Found PS500 open | ||
| Sony | CCDTR400 | NO VIDEO FROM IO JACKS / CAB. KNOCKING PARTS OFF BOARD VS104 | No video from IO Jacko on camcorder. | ||
| Sony | CCDTR400 | MOTORS NOT WORKING (LOADING, CAPSTAN) F451 OPEN / BAD CN901 | Motors not working (loading capstan) F451 open. | ||
| Sony | CCDTR400 | BATTERY DOWN ADJUSTMENT - CORRECTION | The battery down adjustment in the manual is incorrect. -HQ COMMENTS: Working on a solution. | ||
| Sony | CCDTR400 | NO LOADING, TAPE JAMMED IN UNIT REPLACE LOADING GEAR (B) | Unit had no loading or unloading. It came in with a tape jammed in it. | ||
| Sony | CCDTR400 | POOR FOCUS/ADJUST FLANGE BACK | Poor focus. | ||
| Sony | CCDTR400 | TAPE STUCK, NO FUNCTIONS, BEEPS WHEN TURNED ON/MODE SWITCH | Tape stuck, no functions, beeps when turned on. |