Dicas Reparação
Modelo - Chassis CCDFX710
Pesquisa: CCDFX710 Enviar Dica Resolvida
Resultados 21
Pedir dica reparação
| Marca | Modelo (Chassis) | Sintoma | Causa | Solução | Por: |
|---|---|---|---|---|---|
| Sony | CCDFX710 | AVAILABILITY OF FP-443 BOARD | What is the part number for the FP-443 flex board? -HQ COMMENTS: This part is not available separately. It is supplied withthe LS Chassis Assy (X-3941-265-1). | ||
| Sony | CCDFX710 | F-950 OPEN/REPLACE F-950 | Customer complained of unit inoperative at turn on. I couldnot get a new fuse to blow. Current measurements appeared normal. -HQ COMMENTS: Please refer to Technical Flash No. 88. Please sendsamples and fill in the form attached to TF #88. | ||
| Sony | CCDFX710 | INTERMITTENT SOLARIZED PICTURE/IC-707, CS-33 | Unit Playback was fine on pre-recorded tapes. Camera videodisplayed a solarized picture after warm up (similar to problem when anyof the ten data lines are missing). | ||
| Sony | CCDFX710 | DISTORTED VIDEO FROM CAMERA/IC-802, CS-33 | Playback of pre-recorded tapes was fine. E-E from camerasection would become distorted after 5 minutes. Checked data lines on theA/D converter chip IC-802. They would become noisy after warm-up.Distortion would disappear if freeze spray was applied to | ||
| Sony | CCDFX710 | LOSS OF COLOR | Camera would lose color after one hour of operation. | ||
| Sony | CCDFX710 | BLOWS FUSES F-950 | Unit would blow fuse F-950 when assembled and all cabinetscrews were tight. Found viewfinder 5 volt line to have frayedinsulation. When screws were tightened on, right case component wouldflow through rotating viewfinder bracket through F-011 sticker t |