Marca | Modelo (Chassis) | Sintoma | Causa | Solução | Por: |
---|---|---|---|---|---|
Sony | CCDFX630 | DIST. AUD. (SETTING PAGE D, ADD. 8E DATA TO "AE" FIXED UNIT) | Raspy audio on playback. | ||
Sony | CCDFX630 | RAINBOW COLOR DISTORTION/IC505 VS110BD RESOLDER | Rainbow color distortion when recording over old recordings(FE head is not working) Found problem to be intermittent whendisassembled, pressed on VS110 board, found problem to be cold solderedIC505. (FE on command int.) | ||
Sony | CCDFX630 | NO RECORD/ #117 SWITCH BLOCK CONTROL | Unit would not record, everything else ok. Resoldered IC505,a couple of times, still no rec. I noticed using a remote, unit wouldhave vtr functions when in cam mode, this lead me to vtr/cam sw. | ||
Sony | CCDFX630 | INDIVIDUAL MOTOR TESTING USING RM-95 | Models such as the CCDTR400 and CCDFX430 do not include themotor test on one of the service procedures, ex, capstan forward andreverse drum forward and reverse etc. | ||
Sony | CCDFX630 | HORIZONTAL JITTER / RESOLDER IC505 | Large H jitter on playback. ATF servo appeared to belocked. No mech problems found. | ||
Sony | CCDFX630 | STATIC LINE IN SHADOW / REPLCED A TO D CONVERTER, IC609 | Camera has static line in shadow. | ||
Sony | CCDFX630 | EVF LOOSE / REPLACE SCREWS AND LOCK-TITE. | Found viewfinder hanging loose from cabinet and screws looseto bottom unit. | ||
Sony | CCDFX630 | WHEN EJECT TAPE GUIDES UNLOAD HALFWAY THEN LOAD/PS500 ON VS1 | Trying to eject tape guides would come back halfway then loadagain. Both in VTR and camera. Also when in VTR you could hit play andunit would think there was a tape in mech. | ||
Sony | CCDFX630 | NO BACKUP BATT INDICATION/RECONNECT FLEX CONNECTOR | No backup battery indication. Found flex connector fromswitch block to back up batt was not connected from factory. | ||
Sony | CCDFX630 | NO VIDEO IN CAMERA MODE/REPLACE IC702 | No camera E to E video, only jumpy horisontal lines. VTRvideo OK. | ||
Sony | CCDFX630 | DEAD/REPLACE X501 | Unit dead. | ||
Sony | CCDFX630 | EXTENSION CABLES UNAVAILABLE | The part numbers for the four extension cables needed toservice this model, shown on page 7-1 of service manual, are notrecognized at KCP. The part numbers are #J-6082-285-A, #J-6082-286-A,#J-6082-288-A, and #J-6080-289-A. -HQ COMMENTS: These extender |