Marca | Modelo (Chassis) | Sintoma | Causa | Solução | Por: |
---|---|---|---|---|---|
Sony | CCDFX420 | BW PIX IN REC EVERYTHING ELSE OK/C019-CS37 BD | CN505 pin 11 to C019 the other side goes to pin 2 of Ic001RFC line. Fouind C019 missing. | ||
Sony | CCDFX420 | PB VIDEO IS DARK; HOR BANDS IN MIDDLE; REPLACE IC704 | The picture is dark with black horizonal bands somewhere inthe middle of the screen. Picture also rolls slowly in still mode. | ||
Sony | CCDFX420 | CAMERA VIDEO HAS DIGITAL NOISE / REPLACE CORE IC707 | When in camera mode, the picture looked like it has digitalnoise in video out, but the video looked good in the view finder. AlsoVTR play back on prerecorded tapes looked fine on video out. | ||
Sony | CCDFX420 | PICTURE IN PLAYBACK CUTS IN AND OUT | Picture in playback will cut out/in. SOLUTION: Replace IC501. | ||
Sony | CCDFX420 | NO ATF/REPLACE HEAD AMP | This unit would not playback recorded tapes because there wasno ATF being laid on the tapes. The ATF signal was getting to the headamp. | ||
Sony | CCDFX420 | HAND GRIP BROKEN/REPLACE CABINET X-2941-786-1 | Hand grip broken from cabinet assembly. | ||
Sony | CCDFX420 | CAMERA MODE WILL NOT SWITCH ON/REPLACE S581 | Will not go into the camera standby mode, VTR OK. | ||
Sony | CCDFX420 | NO CAMERA VIDEO/CHECK IC704 | No camera video in standby playback video and audio OK. | ||
Sony | CCDFX420 | AVAILABILITY OF FP-443 BOARD | What is the part number for the FP-443 flex board? -HQ COMMENTS: This part is not available separately. It is supplied withthe LS Chassis Assy (X-3941-265-1). |