Dicas Reparação
Modelo - Chassis CCDFX410
Pesquisa: CCDFX410 Enviar Dica Resolvida
Resultados 41
Pedir dica reparação
| Marca | Modelo (Chassis) | Sintoma | Causa | Solução | Por: |
|---|---|---|---|---|---|
| Sony | CCDFX410 | P/N FOR CASSETTE DOWN SW S005 | This switch is mis-labeled on p.165 of schematic, along withFP-442 flex. I know the p/n 1-570-771-21 appears in other FPRs, but it mayhelp to have direct reference in SERIS. | ||
| Sony | CCDFX410 | DRUM SPEEDS UP, PB SELF REC IN B/W / RESOLDER IC506 | Intermittently this unit would speed up drum and would pbself recorded tapes in b/w. | ||
| Sony | CCDFX410 | UNIT DOES NOT PLAY/RESOLDER IC506 | Unit shuts off during operation intermittently. It does nothold date & time and lithium battery symbol flashes in viewfinder.Replacing battery did not solve the problem. | ||
| Sony | CCDFX410 | MOSAIC PICTURE/RE-ADJUST V-SUB | Picture from camera was in tyupical mosaic pattern. Problemcaused by a mis-adjusted CCD V Sub. Readjustment resolved problem. | ||
| Sony | CCDFX410 | NO PLAYBACK VIDEO/RESOLDER CN002 | No playback video. | ||
| Sony | CCDFX410 | DEAD - RESOLDER CN950 ON PS-282 BOARD | Unit was non-functional. UPC clock and B+ voltages were OK. | ||
| Sony | CCDFX410 | HAZE OF COLORED DOTS OVERLAYS PIX WITH NEW CS31 | After replacement of the CS31 board, the picture is distortedby an overlay of colored dots. Transferring good adjustment data from theLANC computer to the camera does not cure the problem. | ||
| Sony | CCDFX410 | PART NUMBER FOR EXTENDER FOR PS BOARD/USE J-6082-177-A | Is there a jig available to extend the PS-282 board? -HQ COMMENTS: You can use extender J-6082-177-A for this purpose. | ||
| Sony | CCDFX410 | UNIT KEEPS TRYING TO UNLOAD, EVEN AFTER IT HAS | Unit successfully unloads, but doesn't sense completion, socontinues trying. | ||
| Sony | CCDFX410 | NO ZOOM (BUT ZOOM INDICATOR APPEARS) CHECK OUTPUT OF IC709 | When zoom button is depressed Zoom indicator appears in viewfinder, but does not zoom. Checked input to zoom drive IC884 no change.Checked output at IC709 no change. | ||
| Sony | CCDFX410 | NO POWER CAM OR VTR (BATT DETECT IC) | Unit dead, no functions or power at all. Isolated problem toservo - PCB searched for cracks in board or loose connections and foundloose pin at batt detect IC507 pin 8. | ||
| Sony | CCDFX410 | PART NUMBER FOR IRIS ASSEMBLY/USE 3-708-486-01 | Iris assembly is easy to change, but not available. You haveto replace the entire lens. Iris assembly can be removed by 1 screw. | ||
| Sony | CCDFX410 | DIFFERENT CS 31 BOARD/ENTER PAGE D DATA | Orig. BD is P/N 1-642-172-14, new BD is P/N 1-642-172-12.When the power SW is in any position, the camera is on. If you put a tapein, hit stop, then play, a tape will play. If you stop, then hit record,the unit goes in record. Please advise ASAP. -HQ | ||
| Sony | CCDFX410 | NO VIDEO/REPLACE TIMING GENERATOR IC 801 | Unit had no EE video. Found trash on V1 to imager IC. | ||
| Sony | CCDFX410 | CAMERA MODE (TAPE INSERTED) PLAYBACK ONLY/CHECK EDIT SEARCH | Camera mode when tape is inserted goes into playback mode(actually - constant edit view). Found corrosion on VF-44 board in viewfinder. |