Dicas Reparação
Modelo - Chassis CCDF55
Pesquisa: CCDF55 Enviar Dica Resolvida
Resultados 85
Pedir dica reparação
| Marca | Modelo (Chassis) | Sintoma | Causa | Solução | Por: |
|---|---|---|---|---|---|
| Sony | CCDF55 | WHITE BALANCE ADJUSTMENTS | When doing the white balance adjustment in this unit (not thepreset adjustment), be sure to use the C14 color filter. | ||
| Sony | CCDF55 | PART NUMBER FOR EJECT SWITCH | Servicer orders part number 1-571-275-31 (eject switch)and gets physically incompatible switch. -TO TOKYO: Can you check if this is the correct part number?Thank you in advance for your help. -HQ COMMENTS: Correct number is 1-572-284-11. See FPR L1167. | ||
| Sony | CCDF55 | GREEN PICTURE AFTER VC-82 BOARD REPLACEMENT | When VC-82 board is replaced, white balance was very green.When RM-95 was set to the adjustment mode for camera, page F adjustmentsautomatically centered themselves. Is this normal? | ||
| Sony | CCDF55 | E - SHUTTER DOES NOT CHANGE SPEED IN MANUAL MODE | Shutter speed is fixed at 1/60 or 1/100 second, and cannotbe changed with the shutter select button. | ||
| Sony | CCDF55 | DT-77 BOARD IS NOT IN STOCK | The above part number for the DT-77 board is registered inRPC but there is no stock of this part. When will there be stock of thispart, our servicers need them? -HQ COMMENTS: Please order part number A-7068-174-A. | ||
| Sony | CCDF55 | BLANK VIEWFINDER SCREEN (DARK PICTURE SCREEN) | Dark viewfinder screen - no video picture. | ||
| Sony | CCDF55 | INTERMITTENT AUDIO WHEN USING ACV-60 | Intermittent playback audio when using the ACV-60. Movingthe cable next to the adaptor that connects to the camera increasedintermittency. | ||
| Sony | CCDF55 | SERVICE MANUAL CORRECTION | On page 81 connector at the bottom of the page labeled toVA-46 board CN-406 should be labeled ...CN506. -HQ COMMENTS: This is a misprint. Thanks for the observation. | ||
| Sony | CCDF55 | NO PB AUDIO | Unit had no audio on playback. | ||
| Sony | CCDF55 | NO RECORD OR PLAYBACK - GRINDING NOISE | Unit would load tape fine. When it would start to Play orRecord, tape would start to move then unit would shut down and givecaution indicator (flashing eject symbol). A grinding noise was heardduring load and eject. |