Marca | Modelo (Chassis) | Sintoma | Causa | Solução | Por: |
---|---|---|---|---|---|
Hitachi | C24W1TN | Slow to or won't come out of st/by | Caused by the micro prog initilisation not getting past auto greyscale sequence due to A1 setting too high - adj A1 as per service instructs | ||
Hitachi | C24W1TN | Int reverts to st/by | Dry joints IC951, Q601 & Q602 reg | ||
Hitachi | C24W1TN | Int off - esp when tapped | Dry joints VR950 in PSU | ||
Hitachi | A7 C24W1TN | Trips | Does it trip with A1 volts at min/max? If not, check Nicam chip is fully home in its holder |