Marca | Modelo (Chassis) | Sintoma | Causa | Solução | Por: |
---|---|---|---|---|---|
Thomson | RP46 | East-west and north-south bowing. Really bad convergence | The extra power supply is not working. Check R18 on primary side. It should read 220Kohm | ||
Thomson | RP46 | Tripping - EHT splitter faulty, new one has short life | R18 220k hi res & check R9 100k 2w | ||
Ferguson | RP46 rear proj | No convergence | RP09 100k or RP18 220k o/c in conv psu near blue tube | ||
Ferguson | RP46 -proj | Vol level varies on its own | CR11 o/c - near IR01 | ||
Ferguson | RP46 -proj | Red pic at sw on then shuts down | RG18 680k on sub G2 board o/c | ||
Ferguson | RP46 -Proj TV | No Red | R615 [910K] open circuit - in series with the red A1 preset | ||
Ferguson | RP46 | Dead - st/bt led comes on briefly & buzzing from chopper tfmr | Overload on lop caused by EHT splitter shorted |