Dicas Reparação
Modelo - Chassis
Pesquisa: Enviar Dica Resolvida
Resultados 81391
Pedir dica reparação
| Marca | Modelo (Chassis) | Sintoma | Causa | Solução | Por: |
|---|---|---|---|---|---|
| Sony | KV1992R | INTERMITTENT REMOTE, CORRODED PLUG ON REMOTE MODULE | Many complaints on KV-1970, -1971 and -1992 with intermittentremote function. | ||
| Sony | WM10 | WRONG BATTERY LID | Two different type battery lids produced for WM-F10 may besame problem as WM-F10 Technical News A-0062 Feb 15, 1985. -HQ COMMENTS: Although both lids are different in color of the sidewall, they are physically compatible and are registered as the samepa | ||
| Sony | KV2670R | CABLE INTERFERENCE, SUGGEST 220 MHZ TRAP USE | TV on cable. Vertical bars channels, K thru W. Per the cablecompany, there is a pilot signal at channel J (220MHz). I have not beenable to get a trap at this frequency (220MHz). -HQ COMMENTS: Please try Microwave Filter Company. The address is6743 K | ||
| Sony | XR65 | FM DRIFT | FM would come in with stereo indicator lit when unit was firstturned on. After about 20 minutes stereo LED would go out. Slightlyadjusting RV4 would turn indicator back on for a short time before itdrifted again. Found that by hitting C48 with freeze | ||
| Sony | STRVX5 | ERRATIC DISPLAY AND CONTROL OPERATION | From a cold start up unit would have no display and all func-tion LEDs would be lit. After several mins. of being on, display wouldlight, function LEDs would go out and unit would work and not act up. | ||
| Sony | CDP302 | INTERMITTENT PROBLEM OF READING TOC | Unit, intermittently, would not read TOC. Disc motor spinswide open then stops. At other times unit would perform with no problems. | ||
| Sony | KV2670R | BEND AT TOP OF PICTURE | Bending at the top of the picture. The bending changes wheneither the brightness or picture adjustments are performed. Things thathave been tried so far but have not fixed the problem: C532, C534, C547,C548, C229 and PCT T503. -HQ COMMENTS: Disable t | ||
| Sony | KV1332 | COLOR BLEEDING, REPLACED R-537 | Picture seems dull, dark and color bleeding. Also seems likea weak CRT. | ||
| Sony | VTX1000R | MISPRINT ON SCHEMATIC | This unit has a very weak audio. Upon troubleshooting theunit I found out that RV-005, R057 and C061 are not on the schematic. -HQ COMMENTS: We will publish correction on this. | ||
| Sony | KV1922 | INTERMITTENT PINCUSHION | Intermittent pincushion, changes every half an hour. | ||
| Sony | KV1962 | INTERMITTENT SOUND, REPLACED NEOP LAMP | Numerous complaints of intermittent sound on models using neonlamps for channel indicators. On this and some other models using thesame circuit for sound mute during channel change, I noticed that bymonitoring the B+ supply line to the neon lamps and th | ||
| Sony | SL2001 | UNIT WILL NOT GO INTO PLAY MODE | Unit would load, thread tape, FF/RW, but the pinch solenoidwould engage, therefore I had no PB mode. When I checked to see if thecam switch was open by connecting my ohm meter across it while I pressedplay, the unit worked. This was due to the cam SW c | ||
| Sony | SLHF300 | NO PART NUMBER FOR FU-21 BOARD | Need part number for FU-21 board complete. -HQ COMMENTS: Complete part number for the FU-21 board is A-6716-351-A.Part numbers assocated with the board can be found in the S/M correction# 3 P/N 9-972-316-93. | ||
| Sony | SL5200 | NEW FS-27 BOARD | The new PC board is different than the old board for themounting of the auto SW S001. The old board has eight mounting holes ina row. The new board for the mounting of the auto SW S001 has twovertical rows of six holes each. How does the auto SW S001 | ||
| Sony | SL2500 | TAPE SPILLING | In the playback mode the take-up reel was not taking the tapeand the tape was spilling out at the pinch roller. The cassette waslocked in the cassette compartment. |