Dicas Reparação




Modelo - Chassis


Pesquisa: Enviar Dica Resolvida
Resultados 81403
Pedir dica reparação
MarcaModelo
(Chassis)
SintomaCausaSoluçãoPor:
SonyXR7180
NEED PART NUMBER FOR HEAD CABLE Need part number for head cable with connector. -HQ COMMENTS: The playback head flexible cable is supplied as part ofthe head it is not available separately. Please order part number1-543-506-11 to obtain the head and flex cable.
SonyKV2900
UNIT WON'T TURN ON AT 120 VAC Unit came with no function. If you used ac variac and turnedto 140 VAC, unit will work ok. Checked all voltages at Q-601 and IC-601when AC is at 120 VAC. They are half of value. When its already(140 VAC), unit turns on. Bringing it back to 120 VAC u
SonyTCH3600
UNIT CONTAINS FUSE LINKS ON POWER BD NOT REFERENCED IN S/M Unit has (2) 2.5A fuse links connected in series with thecollector of Q-501 and the bridge rectifier and in series with thecollector of Q-502 and the bridge rectifier. The service manual does notshow any reference to these fuses on page 27. -COMMENTS:
SonyCFSW400
MOTOR IN TAPE RECORDER SERVICE BULLETIN 234R RUNS TOO FAST The replacement motor shown in tape recorder service bulletin#234R runs too fast. Why does this bulletin recommend using motor typeMMA-6B9RWBT, when the original motor type DNE-7700A is still availableunder its original part number (A-3133-221-A)? -HQ
SonyCDX7520
WILL NOT LOAD CD When power was applied to unit, CD mechanism would move toload position and would not return to unloaded position.
SonyFD2A
INCORRECT IC CASE STYLE, IC201 The original part listed above is substituted to 8-759-602-XX.This substitute part is a suface mount device. The orginal part is a PCMount Device. The leads are too short to mount on the printed circuitboard. Original part is 8-759-602-99. Replacemen
SonyWMFX43
TUNER OPERATION IS TEMPERATURE SENSITIVE Unit worked perfectly at room temperature but tuner would fadeout below 65 degrees Fahrenheit. Q-53 regulator voltage dropped to 0.8Vwhen unit was cool and up to 2.4 volts when unit was warmed up. Voltagewas unaffected by RV-53 (2.1V adjustment). Foun
SonyXR4257
STATIC AND LOW VOLUME ON RIGHT CHANNEL WHEN USING TAPE DECK Unit has a lot of static and low volume on right channel. Theleft channel is ok. This problem was only on the tape deck tuner wasok on both channels.
SonyXR4147
EXCESSIVE WOW/FLUTTER Unit has excessive Wow/Flutter. The technician replaced thebelt, arm assembly, spindle assembly and motor with no improvement.
SonySTRAV920
STATIC ON RIGHT CHANNEL Unit makes a popping noise when switching functions and a lotof static on right channel.
SonySTRGX9ES
NO AM OR FM Unit has no AM or FM and other functions are ok. Aftertroubleshooting the unit, we found R-652 and R-653 on EQ board open. Wealso found C-115 on tuner board was shorted.
SonySTRAV1070X
ALL LEDS LIGHT UP AT THE SAME TIME All LEDs light up at the same time and other functions arenormal. After troubleshooting unit, we found there was no data or clockon pin 4-8 of IC-103. Following the line to IC-202 system control therewas no data or clock out on pins 41-40.
SonyHSTV102
REPLACEMENT PART FOR M-101 IS INCORRECT Unit does not Play, Rewind or Fast Forward. Technician order-ed the motor part number X-3390-803-1. Number on the original motor wasSHL2L-509930F. New motor had a different number SHL2L-50143F. This newmotor not only has a different number but also h
SonySTRVX6
DC OUT ON LEFT CHANNEL INTERMITTENTLY Unit pushes speaker cone out intermittently and it shuts down.After the technician checked the unit, he found 1V DC at the speaker ter-minal on L/C and replaced almost all the transistors with negative re-sults. I found if I open the line between the pr
SonyTCK501R
NO FAST FORWARD/FAST REVERSE Unit does not Fast Forward/Fast Reverse. After the techniciantroubleshot the unit, he replaced IC-501, Q569, Q563, Q561, Q566, Q568,AMS solenoid, D1004, D1002 and C1005 with no solution. I recheckedeverything and found if I connected the volt meter acr


Assistência TécnicaAs dicas apresentadas destinam-se a técnicos de eletrónica, a tentativa de reparação ou assistência sem ter conhecimentos de eletricidade e eletrónica, podem provocar danos mais graves aos equipamentos e, devido a tensões muito elevadas em alguns circuitos, graves danos fisicos que podem constituir um risco em determinadas reparações.

Não arrisque reparar equipamentos com tensões elevadas se não tiver conhecimentos técnicos para o fazer em segurança.

Verifique se o esquema está disponível na área de downloads