DV3751H Service Mode (Modo de Serviço)
Modelo:DV3751H
Marca
Mod.
Ch.
Tipo
Modo
Proced.
File
Sharp
CTV
Service Mode
1. Connect a test pattern to the antenna terminal 2. Tune to this signal 3. Connect a jumper wire between terminals 2 and 6 of the service slot on the video PWB 4. Press the MODE button on the remote control 5. 'SERV' will appear on the screen 6. Remove the jumper wire Use the channel up and down buttons to move between the options Use the volume control buttons to change the data Use the standby button on the remote control to store the data Turn the set off at the mains to exit the service mode.
Sharp
CTV
Service Mode
1. Connect a test pattern to the antenna terminal
2. Tune to this signal
3. Connect a jumper wire between terminals 2 and 6 of the service slot on the video PWB
4. Press the MODE button on the remote control
5. 'SERV' will appear on the screen
6. Remove the jumper wire
Use
Universal LED TV Service Mode
Most universal led tv boards check:
- Menu → 1147
- Menu → 2580
- Source → 2580
All LED TV Service Codes
- Menu → 1147
- Menu → 1185
- Menu → 1183
- Menu → 2580
- Menu → 1187
- Menu → 7050
- Menu → 8202
- Menu → 7343
- Menu → 2008
- Menu → 1999
- Menu → 0000
- Menu → 1167
- Menu → 1199
- Menu → 1234
- Menu → 2387
- Menu → 8893
- Menu → 2383
- Menu → 4725
- Source → 3138
- Source → 2580
- Source → 2585
- Source → 7342
- Source → 2583
- Source → 2283
- Source → 2285
- Source → 3195
- Source → 3137
- Source → 0000
